vs.

      John Deere 755C serie II vs. Caterpillar 931B LGP

      16 reasons to buy John Deere 755C serie II:

      Sizes

      Clearance 426 mm and 330 mm 23 % more or 96 mm
      Ground clearance at full height and unloading 3085 mm and 2515 mm 18 % more or 570 mm
      Width to outside of caterpillar track 2308 mm and 2290 mm 1 % more or 18 mm

      Operation

      Cooling system fluid volume 57.9 l. and 20 l. 65 % more or 37.9 l.
      Engine oil volume 22 l. and 12 l. 45 % more or 10 l.
      Each final drive fluid volume 68.1 l. and 12 l. 82 % more or 56.1 l.
      Hydraulic system fluid volume 174.9 l. and 84 l. 52 % more or 90.9 l.
      Fuel Capacity 319.9 l. and 116 l. 64 % more or 203.9 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes

      Motor

      Effective power 132 kW and 48 kW 64 % more or 84 kW
      Displacement 10 l. and 5.2 l. 48 % more or 4.8 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 208.2 l/min and 84 l/min 60 % more or 124.2 l/min
      Lowering time 1.5 sec and 3.5 sec 57 % less or 2.0 sec

      Carrier

      Rolling bearings number on either side 6 and 5 17 % more or 1
      Contact with ground area 2.7 m2 and 2.4 m2 11 % more or 0.3 m2

      7 reasons to buy Caterpillar 931B LGP:

      Operation

      Maximum speed 11.4 km/h and 10.9 km/h 4 % more or 0.5 km/h
      Static tipping load 5196 kg and 13795 kg 62 % less or 8599 kg
      Breakout force in folded state 56.4 kN and 164.9 kN 66 % less or 108.5 kN

      Motor

      Power measured at 2400 rev / min and 1800 rev / min 25 % more or 600 rev

      Hydraulic system

      Lifting time 6.1 sec and 6.5 sec 6 % less or 0.4 sec
      Unloading time 1.4 sec and 2.1 sec 33 % less or 0.7 sec

      Carrier

      Specific ground pressure 32 kPa and 75.8 kPa 58 % less or 43.8 kPa

      Neutral reasons:

      Sizes

      Height to cab upper part 3304 mm and 2690 mm
      Radius at high altitude unloading 1192 mm and 762 mm
      Length to front of caterpillar track 4801 mm and 2743 mm
      Length with bucket on ground level 6832 mm and 3835 mm

      Operation

      Working weight 21001.3 kg and 8345 kg
      Operating voltage 24 V and 12 V

      Motor

      Manufacturer Liebherr and Caterpillar
      Model D 926 T-EA2 and 3204

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Gear type pump with single section
      Overflow valve pressure 25993.2 kPa and 17236.9 kPa

      Carrier

      Track width 1800 mm and 1650 mm
      Track shoe width 508 mm and 635 mm
      Caterpillar track length on ground level 2673 mm and 1902 mm

      Images

      Sizes

      7. Ground clearance at full height and unloading 3085 mm 7. Ground clearance at full height and unloading 2515 mm
      8. Radius at high altitude unloading 1192 mm 8. Radius at high altitude unloading 762 mm
      1. Length with bucket on ground level 6832 mm 1. Length with bucket on ground level 3835 mm
      2. Width to outside of caterpillar track 2308 mm 2. Width to outside of caterpillar track 2290 mm
      3. Height to cab upper part 3304 mm 3. Height to cab upper part 2690 mm
      5. Clearance 426 mm 5. Clearance 330 mm

      Carrier

      9. Track width 1800 mm 9. Track width 1650 mm