vs.

      Case 1150K WT vs. Dressta TD7M LGP

      15 reasons to buy Case 1150K WT:

      Standard blade

      Volume 3.2 m3 and 1.5 m3 53 % more or 1.7 m3
      Cut depth 482.6 mm and 279 mm 42 % more or 203.6 mm

      Sizes

      Clearance 380 mm and 323 mm 15 % more or 57 mm

      Operation

      Fuel Capacity 246.1 l. and 170 l. 31 % more or 76.1 l.
      Cooling system fluid volume 32.2 l. and 24.9 l. 23 % more or 7.3 l.
      Hydraulic system fluid volume 98.4 l. and 70 l. 29 % more or 28.4 l.

      Motor

      Displacement 6.7 l. and 4.5 l. 33 % more or 2.2 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Full power 97 kW and 60 kW 38 % more or 37 kW
      Effective power 88 kW and 55 kW 37 % more or 33 kW
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 132.1 l/min and 75.2 l/min 43 % more or 56.9 l/min

      Gear box

      Maximum forward speed 9.7 km/h and 9.2 km/h 5 % more or 0.5 km/h

      Carrier

      Track shoes number per side 43 and 37 14 % more or 6
      Rolling bearings number on either side 7 and 6 14 % more or 1

      4 reasons to buy Dressta TD7M LGP:

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Gear box

      Forward gears number 3 and 1 67 % more or 2
      Reverse gears number 3 and 1 67 % more or 2
      Maximum reverse gear 10.8 km/h and 9.7 km/h 10 % more or 1.1 km/h

      Neutral reasons:

      Standard blade

      Blade angle in both directions 25 degrees and 25 degrees
      Width 3350 mm and 2819.4 mm
      Height 1120 mm and 840 mm

      Sizes

      Height to cab upper part 2840 mm and 2660 mm
      Length with blade 5030 mm and 4776 mm

      Operation

      Working weight 13002.2 kg and 7997 kg
      Operating voltage 24 V and 12 V

      Motor

      Manufacturer Case and Cummins
      Model 667TA/EDJ and B4.5
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and 4-stroke diesel engine, natural aspiration, direct run, direct injection

      Hydraulic system

      Overflow valve pressure 19512.1 kPa and 15512 kPa

      Gear box

      Transmission type Hydro-Static Transmission and Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds

      Carrier

      Standard shoe size 762 mm and 610 mm
      Caterpillar track pitch 175.3 mm and 165 mm

      Images

      Sizes

      1. Length with blade 5030 mm 1. Length with blade 4776 mm
      3. Height to cab upper part 2840 mm 3. Height to cab upper part 2660 mm
      5. Clearance 380 mm 5. Clearance 323 mm

      Carrier

      8. Standard shoe size 762 mm 8. Standard shoe size 610 mm