vs.

      Case 550H LT vs. Liebherr PR724 XL

      8 reasons to buy Case 550H LT:

      Standard blade

      Blade angle in both directions 25 degrees and 23 degrees 8 % more or 2 degrees

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Gear box

      Maximum reverse gear 10.3 km/h and 7.8 km/h 24 % more or 2.5 km/h
      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 2 50 % more or 2

      Carrier

      Specific ground pressure 39.3 kPa and 43.2 kPa 9 % less or 3.9 kPa
      Track shoes number per side 37 and 2 95 % more or 35

      14 reasons to buy Liebherr PR724 XL:

      Standard blade

      Cut depth 497 mm and 495 mm 0 % more or 2 mm
      Volume 3.2 m3 and 1.5 m3 53 % more or 1.7 m3

      Sizes

      Clearance 475 mm and 353 mm 26 % more or 122 mm

      Operation

      Fuel Capacity 365 l. and 115.5 l. 68 % more or 249.5 l.
      Cooling system fluid volume 30 l. and 15.6 l. 48 % more or 14.4 l.
      Engine oil volume 19 l. and 10.4 l. 45 % more or 8.6 l.
      Hydraulic system fluid volume 162 l. and 39 l. 76 % more or 123 l.
      Final drive fluid volume 18.5 l. and 5.7 l. 69 % more or 12.8 l.

      Motor

      Effective power 117.8 kW and 50 kW 58 % more or 67.8 kW
      Displacement 6.6 l. and 3.9 l. 41 % more or 2.7 l.
      Full power 119.3 kW and 56 kW 53 % more or 63.3 kW

      Hydraulic system

      Pump bandwidth 174 l/min and 82.9 l/min 52 % more or 91.1 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.3 km/h 15 % more or 1.7 km/h

      Carrier

      Rolling bearings number on either side 8 and 6 25 % more or 2

      Neutral reasons:

      Standard blade

      Width 2440 mm and 3204 mm
      Height 838 mm and 1200 mm

      Sizes

      Width between caterpillar tracks 1750 mm and 2648 mm
      Height to cab upper part 2580 mm and 3197 mm
      Caterpillar track length on ground level 1980 mm and 3210 mm

      Operation

      Working weight 6494 kg and 17295 kg
      Operating voltage 12 V and 24 V

      Motor

      Cylinders number 4 and 4
      Aspiration natural aspiration and Direct injection with turbocharging
      Manufacturer Case and Liebherr
      Model 4-390 and D 924 TI-E

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 19994.8 kPa

      Gear box

      Transmission type Case modulated transmission with full mesh and Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body

      Carrier

      Standard shoe size 406 mm and 609.6 mm
      Track width 1630 mm and 1800 mm

      Images

      Sizes

      5. Clearance 353 mm 5. Clearance 475 mm
      2. Width between caterpillar tracks 1750 mm 2. Width between caterpillar tracks 2648 mm
      3. Height to cab upper part 2580 mm 3. Height to cab upper part 3197 mm
      4. Caterpillar track length on ground level 1980 mm 4. Caterpillar track length on ground level 3210 mm

      Carrier

      7. Track width 1630 mm 7. Track width 1800 mm
      8. Standard shoe size 406 mm 8. Standard shoe size 609.6 mm