vs.

      Case 550H LT vs. New Holland D180 XLT

      5 reasons to buy Case 550H LT:

      Standard blade

      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 39.3 kPa and 56.8 kPa 31 % less or 17.5 kPa

      19 reasons to buy New Holland D180 XLT:

      Standard blade

      Volume 5.6 m3 and 1.5 m3 73 % more or 4.1 m3
      Cut depth 550 mm and 495 mm 10 % more or 55 mm

      Sizes

      Clearance 390 mm and 353 mm 9 % more or 37 mm

      Operation

      Final drive fluid volume 18 l. and 5.7 l. 68 % more or 12.3 l.
      Hydraulic system fluid volume 110 l. and 39 l. 65 % more or 71 l.
      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes
      Fuel Capacity 400 l. and 115.5 l. 71 % more or 284.5 l.
      Cooling system fluid volume 30 l. and 15.6 l. 48 % more or 14.4 l.
      Engine oil volume 19 l. and 10.4 l. 45 % more or 8.6 l.

      Motor

      Effective power 134.2 kW and 50 kW 63 % more or 84.2 kW
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 165 l/min and 82.9 l/min 50 % more or 82.1 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 9.3 km/h 12 % more or 1.3 km/h
      Maximum reverse gear 12.7 km/h and 10.3 km/h 19 % more or 2.4 km/h

      Carrier

      Contact with ground area 35.9 m2 and 1.6 m2 96 % more or 34.3 m2
      Track shoes number per side 45 and 37 18 % more or 8
      Rolling bearings number on either side 8 and 6 25 % more or 2
      Support rollers number on either side 2 and 1 50 % more or 1

      Neutral reasons:

      Standard blade

      Width 2440 mm and 3420 mm
      Height 838 mm and 1425 mm

      Sizes

      Length with blade 3970 mm and 5878 mm
      Width between caterpillar tracks 1750 mm and 2460 mm
      Height to cab upper part 2580 mm and 3235 mm
      Caterpillar track length on ground level 1980 mm and 3205 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 6494 kg and 20800 kg

      Motor

      Manufacturer Case and Cummins
      Model 4-390 and 6CTA8.3
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 19000 kPa

      Gear box

      Transmission type Case modulated transmission with full mesh and Powershift, camshaft, full mesh

      Carrier

      Standard shoe size 406 mm and 560 mm
      Track width 1630 mm and 1900 mm

      Images

      Sizes

      1. Length with blade 3970 mm 1. Length with blade 5878 mm
      2. Width between caterpillar tracks 1750 mm 2. Width between caterpillar tracks 2460 mm
      3. Height to cab upper part 2580 mm 3. Height to cab upper part 3235 mm
      4. Caterpillar track length on ground level 1980 mm 4. Caterpillar track length on ground level 3205 mm
      5. Clearance 353 mm 5. Clearance 390 mm

      Carrier

      7. Track width 1630 mm 7. Track width 1900 mm
      8. Standard shoe size 406 mm 8. Standard shoe size 560 mm