- Home/
- Comparison/
- Tracked Tractor/
- Case 650K WT vs. New Holland D85 WT
Case 650K WT vs. New Holland D85 WT
2 reasons to buy Case 650K WT:
Sizes
Clearance | 383 mm and 379 mm | 1 % more or 4 mm |
Hydraulic system
Pump bandwidth | 78.7 l/min and 76.8 l/min | 2 % more or 1.9 l/min |
6 reasons to buy New Holland D85 WT:
Standard blade
Cut depth | 483 mm and 482.6 mm | 0 % more or 0.4 mm |
Motor
Effective power | 62.6 kW and 55.8 kW | 11 % more or 6.8 kW |
Maximum torque | 400 Nm and 355.2 Nm | 11 % more or 44.8 Nm |
Full power | 66.4 kW and 59.7 kW | 10 % more or 6.7 kW |
Carrier
Specific ground pressure | 31.8 kPa and 36.5 kPa | 13 % less or 4.7 kPa |
Track shoes number per side | 39 and 38 | 3 % more or 1 |
Neutral reasons:
Standard blade
Width | 2794 mm and 2790 mm |
Height | 914 mm and 910 mm |
Volume | 1.8 m3 and 1.8 m3 |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Length with blade | 4276 mm and 4171 mm |
Width between caterpillar tracks | 2261 mm and 2590 mm |
Height to cab upper part | 2773 mm and 2773 mm |
Caterpillar track length on ground level | 2230 mm and 2260 mm |
Operation
Working weight | 8572.9 kg and 8936 kg |
Fuel Capacity | 189.3 l. and 189.3 l. |
Cooling system fluid volume | 18.9 l. and 18.9 l. |
Engine oil volume | 13.6 l. and 13.6 l. |
Hydraulic system fluid volume | 75.7 l. and 75.7 l. |
Final drive fluid volume | 14.2 l. and 14.2 l. |
Operating voltage | 12 V and 12 V |
Generator current strength | 65 amperes and 65 amperes |
Motor
Model | Family III 445T/M2 diesel and 445T/M2 |
Power measured at | 2000 rev / min and 2000 rev / min |
Displacement | 4.5 l. and 4.5 l. |
Torque measured at | 1400 rev / min and 1400 rev / min |
Cylinders number | 4 and 4 |
Manufacturer | Case and New Holland |
Gear box
Maximum forward speed | 9.7 km/h and 9.7 km/h |
Transmission type | Hydro-Static Transmission and Hydro-Static Transmission |
Carrier
Support rollers number on either side | 1 and 1 |
Caterpillar track pitch | 170.9 mm and 171 mm |
Track width | 1700 mm and 1780 mm |
Standard shoe size | 508 mm and 610 mm |
Rolling bearings number on either side | 6 and 6 |
Images
Sizes
1. Length with blade | 4276 mm | 1. Length with blade | 4171 mm |
2. Width between caterpillar tracks | 2261 mm | 2. Width between caterpillar tracks | 2590 mm |
3. Height to cab upper part | 2773 mm | 3. Height to cab upper part | 2773 mm |
4. Caterpillar track length on ground level | 2230 mm | 4. Caterpillar track length on ground level | 2260 mm |
5. Clearance | 383 mm | 5. Clearance | 379 mm |
Carrier
7. Track width | 1700 mm | 7. Track width | 1780 mm |
8. Standard shoe size | 508 mm | 8. Standard shoe size | 610 mm |