- Home/
- Comparison/
- Tracked Tractor/
- Case 650L LT vs. Caterpillar D3C XL serie III
Case 650L LT vs. Caterpillar D3C XL serie III
10 reasons to buy Case 650L LT:
Standard blade
Cut depth | 531 mm and 398 mm | 25 % more or 133 mm |
Sizes
Clearance | 366 mm and 300 mm | 18 % more or 66 mm |
Operation
Fuel Capacity | 155.2 l. and 121.7 l. | 22 % more or 33.5 l. |
Cooling system fluid volume | 21.4 l. and 9 l. | 58 % more or 12.4 l. |
Hydraulic system fluid volume | 62.5 l. and 56.8 l. | 9 % more or 5.7 l. |
Final drive fluid volume | 14.2 l. and 9.5 l. | 33 % more or 4.7 l. |
Generator current strength | 65 amperes and 55 amperes | 15 % more or 10 amperes |
Motor
Full power | 60 kW and 58.2 kW | 3 % more or 1.8 kW |
Effective power | 55.2 kW and 52.9 kW | 4 % more or 2.3 kW |
Hydraulic system
Pump bandwidth | 76.8 l/min and 54.1 l/min | 30 % more or 22.7 l/min |
9 reasons to buy Caterpillar D3C XL serie III:
Operation
Engine oil volume | 13 l. and 12.3 l. | 5 % more or 0.7 l. |
Motor
Displacement | 5 l. and 4.5 l. | 10 % more or 0.5 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Gear box
Maximum reverse gear | 11.4 km/h and 8.9 km/h | 22 % more or 2.5 km/h |
Forward gears number | 3 and 1 | 67 % more or 2 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum forward speed | 10.8 km/h and 8.9 km/h | 18 % more or 1.9 km/h |
Carrier
Specific ground pressure | 42.5 kPa and 42.7 kPa | 0 % less or 0.2 kPa |
Neutral reasons:
Standard blade
Width | 2438 mm and 2474 mm |
Height | 841 mm and 841 mm |
Volume | 1.3 m3 and 1.3 m3 |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Width between caterpillar tracks | 1828 mm and 1828 mm |
Height to cab upper part | 2639 mm and 2664 mm |
Caterpillar track length on ground level | 2120 mm and 2055 mm |
Length with blade | 4149 mm and 4020 mm |
Operation
Working weight | 7370.9 kg and 7231 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Case and Caterpillar |
Model | 445TA/EHA and 3046 |
Hydraulic system
Overflow valve pressure | 20856.6 kPa and 17236.9 kPa |
Gear box
Transmission type | Hydro-Static Transmission and powershift |
Carrier
Track shoes number per side | 39 and 39 |
Rolling bearings number on either side | 6 and 6 |
Track width | 1420 mm and 1422 mm |
Standard shoe size | 406.4 mm and 406 mm |
Images
Sizes
4. Caterpillar track length on ground level | 2120 mm | 4. Caterpillar track length on ground level | 2055 mm |
5. Clearance | 366 mm | 5. Clearance | 300 mm |
1. Length with blade | 4149 mm | 1. Length with blade | 4020 mm |
2. Width between caterpillar tracks | 1828 mm | 2. Width between caterpillar tracks | 1828 mm |
3. Height to cab upper part | 2639 mm | 3. Height to cab upper part | 2664 mm |
Carrier
7. Track width | 1420 mm | 7. Track width | 1422 mm |
8. Standard shoe size | 406.4 mm | 8. Standard shoe size | 406 mm |