vs.

      Case 750H LT vs. Hitachi DX195L

      5 reasons to buy Case 750H LT:

      Standard blade

      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees
      Cut depth 457 mm and 452 mm 1 % more or 5 mm

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      15 reasons to buy Hitachi DX195L:

      Standard blade

      Volume 3.2 m3 and 1.7 m3 47 % more or 1.5 m3

      Operation

      Fuel Capacity 345 l. and 177.9 l. 48 % more or 167.1 l.
      Cooling system fluid volume 40 l. and 18.9 l. 53 % more or 21.1 l.
      Engine oil volume 15 l. and 10.4 l. 31 % more or 4.6 l.
      Final drive fluid volume 18 l. and 7.1 l. 61 % more or 10.9 l.

      Motor

      Effective power 123 kW and 60.4 kW 51 % more or 62.6 kW
      Maximum torque 682 Nm and 310.5 Nm 54 % more or 371.5 Nm
      Displacement 8.1 l. and 3.9 l. 52 % more or 4.2 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 162 l/min and 90.5 l/min 44 % more or 71.5 l/min

      Gear box

      Maximum forward speed 9.3 km/h and 9.2 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 11.3 km/h and 10.1 km/h 11 % more or 1.2 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1
      Support rollers number on either side 2 and 1 50 % more or 1
      Track shoes number per side 41 and 38 7 % more or 3

      Neutral reasons:

      Standard blade

      Height 914 mm and 1030 mm
      Width 2640 mm and 4057 mm

      Sizes

      Length with blade 4290 mm and 5083 mm
      Width between caterpillar tracks 1980 mm and 4057 mm
      Height to cab upper part 2890 mm and 3203 mm
      Caterpillar track length on ground level 2240 mm and 2600 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 7839.9 kg and 19730 kg

      Motor

      Manufacturer Case and IVECO
      Model 4T-390 and 8365T
      Torque measured at 1400 rev / min and 1400 rev / min

      Hydraulic system

      Overflow valve pressure 15168.5 kPa and 18615.8 kPa

      Gear box

      Transmission type Case full mesh modulated and Powershift, camshaft, full mesh

      Carrier

      Track width 1520 mm and 1870 mm
      Standard shoe size 457.2 mm and 609.6 mm

      Images

      Sizes

      1. Length with blade 4290 mm 1. Length with blade 5083 mm
      2. Width between caterpillar tracks 1980 mm 2. Width between caterpillar tracks 4057 mm
      3. Height to cab upper part 2890 mm 3. Height to cab upper part 3203 mm
      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 2600 mm

      Carrier

      7. Track width 1520 mm 7. Track width 1870 mm
      8. Standard shoe size 457.2 mm 8. Standard shoe size 609.6 mm