- Home/
- Comparison/
- Tracked Tractor/
- Case 750L LT vs. John Deere 450J LT
Case 750L LT vs. John Deere 450J LT
15 reasons to buy Case 750L LT:
Standard blade
Volume | 1.7 m3 and 1.5 m3 | 12 % more or 0.2 m3 |
Sizes
Clearance | 379 mm and 345 mm | 9 % more or 34 mm |
Operation
Fuel Capacity | 189.3 l. and 178 l. | 6 % more or 11.3 l. |
Cooling system fluid volume | 22.5 l. and 16 l. | 29 % more or 6.5 l. |
Hydraulic system fluid volume | 75.7 l. and 32.2 l. | 57 % more or 43.5 l. |
Final drive fluid volume | 14.2 l. and 6.6 l. | 54 % more or 7.6 l. |
Generator current strength | 90 amperes and 65 amperes | 28 % more or 25 amperes |
Motor
Maximum torque | 390.5 Nm and 318 Nm | 19 % more or 72.5 Nm |
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Effective power | 62.6 kW and 52 kW | 17 % more or 10.6 kW |
Hydraulic system
Pump bandwidth | 76.8 l/min and 56.8 l/min | 26 % more or 20.0 l/min |
Gear box
Maximum reverse gear | 9.7 km/h and 8 km/h | 18 % more or 1.7 km/h |
Maximum forward speed | 9.7 km/h and 8 km/h | 18 % more or 1.7 km/h |
Carrier
Specific ground pressure | 36.5 kPa and 40.7 kPa | 10 % less or 4.2 kPa |
Contact with ground area | 2.1 m2 and 1.8 m2 | 14 % more or 0.3 m2 |
5 reasons to buy John Deere 450J LT:
Standard blade
Blade angle in both directions | 25.4 degrees and 25 degrees | 2 % more or 0.4 degrees |
Cut depth | 528 mm and 483 mm | 9 % more or 45 mm |
Operation
Engine oil volume | 14 l. and 11.5 l. | 18 % more or 2.5 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Carrier
Track shoes number per side | 40 and 39 | 2 % more or 1 |
Neutral reasons:
Standard blade
Width | 2642 mm and 2464 mm |
Height | 914 mm and 826 mm |
Sizes
Length with blade | 4322 mm and 3937 mm |
Width between caterpillar tracks | 2032 mm and 1854 mm |
Height to cab upper part | 2773 mm and 2743 mm |
Caterpillar track length on ground level | 2260 mm and 2184 mm |
Operation
Working weight | 8569 kg and 7401 kg |
Operating voltage | 12 V and 12 V |
Motor
Displacement | 4.5 l. and 4.5 l. |
Cylinders number | 4 and 4 |
Manufacturer | Case and John Deere |
Model | Family IV, 445TA/E66 3 level and 4045T |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 20684.3 kPa |
Gear box
Transmission type | hydrostatic and Hydro-Static Transmission |
Carrier
Standard shoe size | 457 mm and 406 mm |
Rolling bearings number on either side | 6 and 6 |
Caterpillar track pitch | 171 mm and 159.8 mm |
Track width | 1570 mm and 1450 mm |
Images
Sizes
4. Caterpillar track length on ground level | 2260 mm | 4. Caterpillar track length on ground level | 2184 mm |
5. Clearance | 379 mm | 5. Clearance | 345 mm |
1. Length with blade | 4322 mm | 1. Length with blade | 3937 mm |
2. Width between caterpillar tracks | 2032 mm | 2. Width between caterpillar tracks | 1854 mm |
3. Height to cab upper part | 2773 mm | 3. Height to cab upper part | 2743 mm |
Carrier
7. Track width | 1570 mm | 7. Track width | 1450 mm |
8. Standard shoe size | 457 mm | 8. Standard shoe size | 406 mm |