vs.

      Case 850H WT vs. John Deere 450H

      17 reasons to buy Case 850H WT:

      Standard blade

      Volume 1.9 m3 and 1.4 m3 26 % more or 0.5 m3

      Sizes

      Clearance 404 mm and 346 mm 14 % more or 58 mm

      Operation

      Fuel Capacity 177.9 l. and 136 l. 24 % more or 41.9 l.
      Cooling system fluid volume 18.9 l. and 16 l. 15 % more or 2.9 l.
      Engine oil volume 15.2 l. and 14 l. 8 % more or 1.2 l.
      Hydraulic system fluid volume 52.5 l. and 32.2 l. 39 % more or 20.3 l.
      Final drive fluid volume 7.1 l. and 6.6 l. 7 % more or 0.5 l.

      Motor

      Full power 72.3 kW and 54.4 kW 25 % more or 17.9 kW
      Effective power 67.9 kW and 52.2 kW 23 % more or 15.7 kW
      Maximum torque 387.8 Nm and 302.3 Nm 22 % more or 85.5 Nm
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 90.5 l/min and 56.8 l/min 37 % more or 33.7 l/min

      Gear box

      Maximum forward speed 9 km/h and 8 km/h 11 % more or 1 km/h
      Maximum reverse gear 9.9 km/h and 8 km/h 19 % more or 1.9 km/h

      Carrier

      Track shoes number per side 38 and 37 3 % more or 1
      Rolling bearings number on either side 6 and 5 17 % more or 1

      3 reasons to buy John Deere 450H:

      Standard blade

      Blade angle in both directions 25.4 degrees and 25 degrees 2 % more or 0.4 degrees
      Cut depth 528 mm and 457 mm 13 % more or 71 mm

      Carrier

      Contact with ground area 15897 m2 and 2.7 m2 100 % more or 15894.3 m2

      Neutral reasons:

      Standard blade

      Width 3050 mm and 2286 mm
      Height 914 mm and 826 mm

      Sizes

      Width between caterpillar tracks 2390 mm and 406 mm
      Height to cab upper part 2890 mm and 2590 mm
      Caterpillar track length on ground level 2240 mm and 1956 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 65 amperes and 65 amperes
      Working weight 8482.2 kg and 6818 kg

      Motor

      Manufacturer Case and John Deere
      Model 6T-590 and 4045D
      Power measured at 2200 rev / min and 2200 rev / min
      Torque measured at 1200 rev / min and 1200 rev / min

      Hydraulic system

      Overflow valve pressure 15168.5 kPa and 20685 kPa

      Gear box

      Transmission type Case full mesh modulated and Electronically controlled hydrostatic drive with a split power flow

      Carrier

      Caterpillar track pitch 171 mm and 159.8 mm
      Standard shoe size 609.6 mm and 406 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2390 mm 2. Width between caterpillar tracks 406 mm
      3. Height to cab upper part 2890 mm 3. Height to cab upper part 2590 mm
      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 1956 mm
      5. Clearance 404 mm 5. Clearance 346 mm

      Carrier

      8. Standard shoe size 609.6 mm 8. Standard shoe size 406 mm