vs.

      Case 850H WT vs. John Deere 850C LT

      2 reasons to buy Case 850H WT:

      Operation

      Generator current strength 65 amperes and 45 amperes 31 % more or 20 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      19 reasons to buy John Deere 850C LT:

      Standard blade

      Volume 5.7 m3 and 1.9 m3 67 % more or 3.8 m3
      Cut depth 513 mm and 457 mm 11 % more or 56 mm

      Sizes

      Clearance 406 mm and 404 mm 0 % more or 2 mm

      Operation

      Engine oil volume 32.2 l. and 15.2 l. 53 % more or 17.0 l.
      Hydraulic system fluid volume 79.5 l. and 52.5 l. 34 % more or 27.0 l.
      Fuel Capacity 348 l. and 177.9 l. 49 % more or 170.1 l.
      Cooling system fluid volume 34 l. and 18.9 l. 44 % more or 15.1 l.
      Final drive fluid volume 12.3 l. and 7.1 l. 42 % more or 5.2 l.

      Motor

      Full power 143.2 kW and 72.3 kW 50 % more or 70.9 kW
      Effective power 138 kW and 67.9 kW 51 % more or 70.1 kW
      Maximum torque 814.8 Nm and 387.8 Nm 52 % more or 427.0 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Hydraulic system

      Pump bandwidth 166 l/min and 90.5 l/min 45 % more or 75.5 l/min

      Gear box

      Maximum forward speed 11 km/h and 9 km/h 18 % more or 2 km/h
      Maximum reverse gear 11 km/h and 9.9 km/h 10 % more or 1.1 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1
      Contact with ground area 3.3 m2 and 2.7 m2 18 % more or 0.6 m2
      Track shoes number per side 40 and 38 5 % more or 2

      Neutral reasons:

      Standard blade

      Width 3050 mm and 128.3 mm
      Height 914 mm and 1435 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 2890 mm and 3151 mm
      Caterpillar track length on ground level 2240 mm and 2743 mm

      Operation

      Working weight 8482.2 kg and 19241 kg
      Operating voltage 12 V and 24 V

      Motor

      Manufacturer Case and John Deere
      Model 6T-590 and 6081A
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 15168.5 kPa and 15514 kPa

      Gear box

      Transmission type Case full mesh modulated and Automatic, hydrostatic drive with a split power flow

      Carrier

      Caterpillar track pitch 171 mm and 203 mm
      Standard shoe size 609.6 mm and 610 mm

      Images

      Sizes

      3. Height to cab upper part 2890 mm 3. Height to cab upper part 3151 mm
      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 2743 mm
      5. Clearance 404 mm 5. Clearance 406 mm

      Carrier

      8. Standard shoe size 609.6 mm 8. Standard shoe size 610 mm