- Home/
- Comparison/
- Tracked Tractor/
- Case 850L WT vs. John Deere 850J WLT Waste Pickup Loader
Case 850L WT vs. John Deere 850J WLT Waste Pickup Loader
4 reasons to buy Case 850L WT:
Standard blade
Blade angle in both directions | 25 degrees and 23.8 degrees | 5 % more or 1.2 degrees |
Operation
Generator current strength | 90 amperes and 80 amperes | 11 % more or 10 amperes |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Specific ground pressure | 31.3 kPa and 42.1 kPa | 26 % less or 10.8 kPa |
17 reasons to buy John Deere 850J WLT Waste Pickup Loader:
Standard blade
Volume | 9.7 m3 and 1.8 m3 | 81 % more or 7.9 m3 |
Cut depth | 704 mm and 483 mm | 31 % more or 221 mm |
Sizes
Clearance | 409 mm and 379 mm | 7 % more or 30 mm |
Operation
Fuel Capacity | 371 l. and 189.3 l. | 49 % more or 181.7 l. |
Cooling system fluid volume | 35 l. and 26.5 l. | 24 % more or 8.5 l. |
Engine oil volume | 26 l. and 15 l. | 42 % more or 11 l. |
Hydraulic system fluid volume | 105.6 l. and 75.7 l. | 28 % more or 29.9 l. |
Motor
Effective power | 138 kW and 72 kW | 48 % more or 66 kW |
Maximum torque | 828 Nm and 435.2 Nm | 47 % more or 392.8 Nm |
Displacement | 9 l. and 6.7 l. | 26 % more or 2.3 l. |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump bandwidth | 174 l/min and 76.8 l/min | 56 % more or 97.2 l/min |
Gear box
Maximum forward speed | 10.1 km/h and 9.7 km/h | 4 % more or 0.4 km/h |
Maximum reverse gear | 10.1 km/h and 9.7 km/h | 4 % more or 0.4 km/h |
Carrier
Track shoes number per side | 45 and 40 | 11 % more or 5 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Contact with ground area | 5 m2 and 2.9 m2 | 42 % more or 2.1 m2 |
Neutral reasons:
Standard blade
Width | 2794 mm and 4013 mm |
Height | 914 mm and 1830 mm |
Sizes
Length with blade | 4408 mm and 5728 mm |
Width between caterpillar tracks | 2388 mm and 2997 mm |
Height to cab upper part | 2773 mm and 3175 mm |
Caterpillar track length on ground level | 2350 mm and 3284 mm |
Operation
Working weight | 9163 kg and 21515 kg |
Operating voltage | 12 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Case and John Deere |
Model | Family IV 667TA/E66 3 level and 6090HT |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 24980 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Hydrostatic with direct drive |
Carrier
Caterpillar track pitch | 171 mm and 200 mm |
Track width | 1570 mm and 2235 mm |
Standard shoe size | 610 mm and 762 mm |
Images
Sizes
5. Clearance | 379 mm | 5. Clearance | 409 mm |
1. Length with blade | 4408 mm | 1. Length with blade | 5728 mm |
2. Width between caterpillar tracks | 2388 mm | 2. Width between caterpillar tracks | 2997 mm |
3. Height to cab upper part | 2773 mm | 3. Height to cab upper part | 3175 mm |
4. Caterpillar track length on ground level | 2350 mm | 4. Caterpillar track length on ground level | 3284 mm |
Carrier
7. Track width | 1570 mm | 7. Track width | 2235 mm |
8. Standard shoe size | 610 mm | 8. Standard shoe size | 762 mm |