vs.

      Caterpillar D10N vs. Dressta TD7M

      12 reasons to buy Caterpillar D10N:

      Standard blade

      Volume 17.2 m3 and 1.4 m3 92 % more or 15.8 m3
      Cut depth 674 mm and 279 mm 59 % more or 395 mm

      Sizes

      Clearance 615 mm and 323 mm 47 % more or 292 mm

      Operation

      Fuel Capacity 1023 l. and 170 l. 83 % more or 853 l.
      Hydraulic system fluid volume 108 l. and 70 l. 35 % more or 38 l.

      Motor

      Full power 387.8 kW and 60 kW 85 % more or 327.8 kW
      Displacement 27 l. and 4.5 l. 83 % more or 22.5 l.

      Hydraulic system

      Pump bandwidth 408 l/min and 75.2 l/min 82 % more or 332.8 l/min

      Gear box

      Maximum forward speed 12.5 km/h and 9.2 km/h 26 % more or 3.3 km/h
      Maximum reverse gear 15.6 km/h and 10.8 km/h 31 % more or 4.8 km/h

      Carrier

      Rolling bearings number on either side 8 and 5 37 % more or 3
      Contact with ground area 4.7 m2 and 1.4 m2 70 % more or 3.3 m2

      1 reasons to buy Dressta TD7M:

      Carrier

      Specific ground pressure 51 kPa and 119.1 kPa 57 % less or 68.1 kPa

      Neutral reasons:

      Standard blade

      Height 2050 mm and 69.9 mm
      Width 4860 mm and 2615.2 mm

      Sizes

      Length with blade 7760 mm and 4060 mm
      Height to cab upper part 4240 mm and 2660 mm

      Operation

      Working weight 57410 kg and 7348 kg

      Motor

      Aspiration turbocharging and 4-stroke diesel engine, natural aspiration, direct run, direct injection
      Manufacturer Caterpillar and Cummins
      Model 3412 and B4.5

      Hydraulic system

      Overflow valve pressure 18600 kPa and 15512 kPa

      Gear box

      Transmission type powershift and Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 610 mm and 381 mm

      Images

      Sizes

      5. Clearance 615 mm 5. Clearance 323 mm
      1. Length with blade 7760 mm 1. Length with blade 4060 mm
      3. Height to cab upper part 4240 mm 3. Height to cab upper part 2660 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 381 mm