vs.

      Caterpillar D3C XL serie III vs. John Deere 700H XLT

      5 reasons to buy Caterpillar D3C XL serie III:

      Operation

      Hydraulic system fluid volume 56.8 l. and 51 l. 10 % more or 5.8 l.

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev

      Gear box

      Maximum forward speed 10.8 km/h and 8.9 km/h 18 % more or 1.9 km/h
      Maximum reverse gear 11.4 km/h and 8.9 km/h 22 % more or 2.5 km/h

      Carrier

      Specific ground pressure 42.5 kPa and 45 kPa 6 % less or 2.5 kPa

      14 reasons to buy John Deere 700H XLT:

      Standard blade

      Volume 2.6 m3 and 1.3 m3 50 % more or 1.3 m3
      Cut depth 541 mm and 398 mm 26 % more or 143 mm

      Sizes

      Clearance 381 mm and 300 mm 21 % more or 81 mm

      Operation

      Final drive fluid volume 13 l. and 9.5 l. 27 % more or 3.5 l.
      Fuel Capacity 227 l. and 121.7 l. 46 % more or 105.3 l.
      Cooling system fluid volume 21 l. and 9 l. 57 % more or 12 l.
      Engine oil volume 19 l. and 13 l. 32 % more or 6 l.
      Power unit fluid volume 65 l. and 28.2 l. 57 % more or 36.8 l.

      Motor

      Full power 91.7 kW and 58.2 kW 37 % more or 33.5 kW
      Effective power 85.8 kW and 52.9 kW 38 % more or 32.9 kW
      Displacement 6.8 l. and 5 l. 26 % more or 1.8 l.

      Hydraulic system

      Pump bandwidth 95 l/min and 54.1 l/min 43 % more or 40.9 l/min

      Carrier

      Track shoes number per side 42 and 39 7 % more or 3
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 2474 mm and 3048 mm
      Height 841 mm and 998 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 2980 mm and 4765 mm
      Width between caterpillar tracks 1828 mm and 2338 mm
      Height to cab upper part 2664 mm and 2985 mm
      Caterpillar track length on ground level 2055 mm and 2600 mm

      Operation

      Operating voltage 12 V and 24 V
      Generator current strength 55 amperes and 55 amperes
      Working weight 7231 kg and 12152 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3046 and PowerTech 6068T
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump gear type pump and Gear pump with fixed displacement
      Overflow valve pressure 17236.9 kPa and 22064 kPa

      Gear box

      Transmission type powershift and Electronically controlled hydrostatic drive with a split power flow

      Images

      Sizes

      2. Width between caterpillar tracks 1828 mm 2. Width between caterpillar tracks 2338 mm
      3. Height to cab upper part 2664 mm 3. Height to cab upper part 2985 mm
      4. Caterpillar track length on ground level 2055 mm 4. Caterpillar track length on ground level 2600 mm
      5. Clearance 300 mm 5. Clearance 381 mm
      6. Length without blade 2980 mm 6. Length without blade 4765 mm