vs.

      Caterpillar D4C LGP serie III vs. Dressta TD20M LT

      5 reasons to buy Caterpillar D4C LGP serie III:

      Operation

      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Hydraulic system

      Pump bandwidth 66.6 l/min and 2.3 l/min 97 % more or 64.3 l/min

      Gear box

      Maximum forward speed 11.1 km/h and 10.6 km/h 5 % more or 0.5 km/h

      Carrier

      Specific ground pressure 29 kPa and 68.8 kPa 58 % less or 39.8 kPa

      16 reasons to buy Dressta TD20M LT:

      Standard blade

      Volume 8.5 m3 and 1.7 m3 80 % more or 6.8 m3
      Cut depth 700 mm and 443 mm 37 % more or 257 mm

      Sizes

      Clearance 460 mm and 374 mm 19 % more or 86 mm

      Operation

      Fuel Capacity 490 l. and 157 l. 68 % more or 333 l.
      Cooling system fluid volume 50 l. and 21 l. 58 % more or 29 l.
      Engine oil volume 23 l. and 13 l. 43 % more or 10 l.
      Hydraulic system fluid volume 133 l. and 56.8 l. 57 % more or 76.2 l.
      Power unit fluid volume 173 l. and 28.2 l. 84 % more or 144.8 l.
      Final drive fluid volume 38 l. and 21.5 l. 43 % more or 16.5 l.

      Motor

      Full power 194 kW and 65.6 kW 66 % more or 128.4 kW
      Effective power 179 kW and 60.4 kW 66 % more or 118.6 kW
      Displacement 8.3 l. and 5 l. 40 % more or 3.3 l.

      Gear box

      Maximum reverse gear 12.5 km/h and 11.9 km/h 5 % more or 0.6 km/h

      Carrier

      Contact with ground area 3.4 m2 and 2.6 m2 24 % more or 0.8 m2
      Track shoes number per side 42 and 39 7 % more or 3
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 3341 mm and 3860 mm
      Height 837 mm and 1.6 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2311 mm and 2890 mm
      Height to cab upper part 2728 mm and 3570 mm
      Length without blade 2960 mm and 4340 mm

      Operation

      Working weight 7725.6 kg and 24760 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 6 and 6
      Aspiration natural aspiration and Turbocharger with charge air cooling
      Manufacturer Caterpillar and Cummins
      Model 3046 and QSC8.3

      Hydraulic system

      Type of pump gear type pump and Numerous gear pumps, actuated with torque converter..
      Overflow valve pressure 2500 lb / sq. inch and 9 lb / sq. inch

      Gear box

      Transmission type powershift and Powershift of modular camshaft, of electrohydraulic action
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 635 mm and 560 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2311 mm 2. Width between caterpillar tracks 2890 mm
      3. Height to cab upper part 2728 mm 3. Height to cab upper part 3570 mm
      5. Clearance 374 mm 5. Clearance 460 mm
      6. Length without blade 2960 mm 6. Length without blade 4340 mm

      Carrier

      8. Standard shoe size 635 mm 8. Standard shoe size 560 mm