vs.

      Caterpillar D4C serie II vs. Dressta TD20M LT

      3 reasons to buy Caterpillar D4C serie II:

      Hydraulic system

      Pump bandwidth 55 l/min and 2.3 l/min 96 % more or 52.7 l/min

      Gear box

      Maximum forward speed 11.1 km/h and 10.6 km/h 5 % more or 0.5 km/h

      Carrier

      Specific ground pressure 43.4 kPa and 68.8 kPa 37 % less or 25.4 kPa

      10 reasons to buy Dressta TD20M LT:

      Standard blade

      Volume 8.5 m3 and 1.6 m3 81 % more or 6.9 m3
      Cut depth 700 mm and 439 mm 37 % more or 261 mm

      Sizes

      Clearance 460 mm and 294.8 mm 36 % more or 165.2 mm

      Operation

      Fuel Capacity 490 l. and 114 l. 77 % more or 376 l.
      Hydraulic system fluid volume 133 l. and 57 l. 57 % more or 76 l.

      Motor

      Displacement 8.3 l. and 5.2 l. 37 % more or 3.1 l.
      Full power 194 kW and 59.7 kW 69 % more or 134.3 kW

      Gear box

      Maximum reverse gear 12.5 km/h and 11.9 km/h 5 % more or 0.6 km/h

      Carrier

      Contact with ground area 3.4 m2 and 1.7 m2 50 % more or 1.7 m2
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 2540 mm and 3860 mm
      Height 930 mm and 1.6 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 3000 mm and 4340 mm
      Width between caterpillar tracks 1830 mm and 2890 mm
      Height to cab upper part 2660 mm and 3570 mm

      Operation

      Working weight 7581 kg and 24760 kg

      Motor

      Manufacturer Caterpillar and Cummins
      Model 3204 and QSC8.3

      Hydraulic system

      Overflow valve pressure 2500 lb / sq. inch and 9 lb / sq. inch

      Gear box

      Transmission type powershift and Powershift of modular camshaft, of electrohydraulic action
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 406 mm and 560 mm

      Images

      Sizes

      2. Width between caterpillar tracks 1830 mm 2. Width between caterpillar tracks 2890 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 3570 mm
      5. Clearance 294.8 mm 5. Clearance 460 mm
      6. Length without blade 3000 mm 6. Length without blade 4340 mm

      Carrier

      8. Standard shoe size 406 mm 8. Standard shoe size 560 mm