vs.

      Dressta TD20M LT vs. Caterpillar D4C serie II

      10 reasons to buy Dressta TD20M LT:

      Standard blade

      Volume 8.5 m3 and 1.6 m3 81 % more or 6.9 m3
      Cut depth 700 mm and 439 mm 37 % more or 261 mm

      Sizes

      Clearance 460 mm and 294.8 mm 36 % more or 165.2 mm

      Operation

      Hydraulic system fluid volume 133 l. and 57 l. 57 % more or 76 l.
      Fuel Capacity 490 l. and 114 l. 77 % more or 376 l.

      Motor

      Full power 194 kW and 59.7 kW 69 % more or 134.3 kW
      Displacement 8.3 l. and 5.2 l. 37 % more or 3.1 l.

      Gear box

      Maximum reverse gear 12.5 km/h and 11.9 km/h 5 % more or 0.6 km/h

      Carrier

      Contact with ground area 3.4 m2 and 1.7 m2 50 % more or 1.7 m2
      Rolling bearings number on either side 7 and 6 14 % more or 1

      3 reasons to buy Caterpillar D4C serie II:

      Hydraulic system

      Pump bandwidth 55 l/min and 2.3 l/min 96 % more or 52.7 l/min

      Gear box

      Maximum forward speed 11.1 km/h and 10.6 km/h 5 % more or 0.5 km/h

      Carrier

      Specific ground pressure 43.4 kPa and 68.8 kPa 37 % less or 25.4 kPa

      Neutral reasons:

      Standard blade

      Width 3860 mm and 2540 mm
      Height 1.6 mm and 930 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 4340 mm and 3000 mm
      Width between caterpillar tracks 2890 mm and 1830 mm
      Height to cab upper part 3570 mm and 2660 mm

      Operation

      Working weight 24760 kg and 7581 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model QSC8.3 and 3204

      Hydraulic system

      Overflow valve pressure 9 lb / sq. inch and 2500 lb / sq. inch

      Gear box

      Transmission type Powershift of modular camshaft, of electrohydraulic action and powershift
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 406 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2890 mm 2. Width between caterpillar tracks 1830 mm
      3. Height to cab upper part 3570 mm 3. Height to cab upper part 2660 mm
      5. Clearance 460 mm 5. Clearance 294.8 mm
      6. Length without blade 4340 mm 6. Length without blade 3000 mm

      Carrier

      8. Standard shoe size 560 mm 8. Standard shoe size 406 mm