vs.

      Dressta TD25M vs. John Deere 950C LGP

      10 reasons to buy Dressta TD25M:

      Standard blade

      Volume 11.5 m3 and 6.3 m3 45 % more or 5.2 m3
      Cut depth 1700 mm and 600 mm 65 % more or 1100 mm

      Operation

      Final drive fluid volume 64 l. and 14.5 l. 77 % more or 49.5 l.
      Fuel Capacity 825 l. and 450 l. 45 % more or 375 l.
      Engine oil volume 49 l. and 25.5 l. 48 % more or 23.5 l.
      Power unit fluid volume 240 l. and 178 l. 26 % more or 62 l.

      Motor

      Effective power 246 kW and 171.5 kW 30 % more or 74.5 kW
      Displacement 15 l. and 10 l. 33 % more or 5 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Maximum reverse gear 12.3 km/h and 11 km/h 11 % more or 1.3 km/h

      9 reasons to buy John Deere 950C LGP:

      Operation

      Cooling system fluid volume 64.4 l. and 56 l. 13 % more or 8.4 l.
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Hydraulic system fluid volume 178 l. and 130 l. 27 % more or 48 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 1.7 l/min 99 % more or 290.3 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.3 km/h 6 % more or 0.7 km/h

      Carrier

      Track shoes number per side 43 and 38 12 % more or 5
      Rolling bearings number on either side 8 and 7 12 % more or 1
      Specific ground pressure 51 kPa and 100 kPa 49 % less or 49 kPa
      Contact with ground area 4.7 m2 and 3.5 m2 26 % more or 1.2 m2

      Neutral reasons:

      Standard blade

      Width 4350 mm and 4500 mm
      Height 1760 mm and 1350 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 5070 mm and 4300 mm
      Width between caterpillar tracks 3210 mm and 2896 mm
      Height to cab upper part 3800 mm and 3305 mm

      Operation

      Working weight 36230 kg and 24600 kg
      Operating voltage 12 V and 24 V

      Motor

      Power measured at 1800 rev / min and 1800 rev / min
      Manufacturer Cummins and Liebherr
      Aspiration Turbocharger with charge air cooling and Turbocharging with intercooler
      Model QSX15 and D 926 TI
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 1 lb / sq. inch and 2320 lb / sq. inch
      Type of pump Numerous vane pumps, actuated with torque converter and Variable displacement piston pump with load sensing proportional pump flow control

      Gear box

      Transmission type Powershift of modular camshaft, of electrohydraulic action and Electronically controlled closed loop hydrostatic drive with a split power flow
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 710 mm

      Images

      Sizes

      2. Width between caterpillar tracks 3210 mm 2. Width between caterpillar tracks 2896 mm
      3. Height to cab upper part 3800 mm 3. Height to cab upper part 3305 mm
      6. Length without blade 5070 mm 6. Length without blade 4300 mm

      Carrier

      8. Standard shoe size 560 mm 8. Standard shoe size 710 mm