vs.

      Dressta TD7M LGP vs. Dressta TD15M LT

      2 reasons to buy Dressta TD7M LGP:

      Operation

      Hydraulic system fluid volume 70 l. and 60 l. 14 % more or 10 l.

      Carrier

      Specific ground pressure 31 kPa and 65.8 kPa 53 % less or 34.8 kPa

      18 reasons to buy Dressta TD15M LT:

      Standard blade

      Volume 3.8 m3 and 1.5 m3 61 % more or 2.3 m3
      Cut depth 600 mm and 279 mm 53 % more or 321 mm

      Sizes

      Clearance 445 mm and 323 mm 27 % more or 122 mm

      Operation

      Fuel Capacity 388 l. and 170 l. 56 % more or 218 l.
      Cooling system fluid volume 50 l. and 24.9 l. 50 % more or 25.1 l.
      Power unit fluid volume 153 l. and 70 l. 54 % more or 83 l.
      Final drive fluid volume 40 l. and 9.5 l. 76 % more or 30.5 l.

      Motor

      Effective power 142 kW and 55 kW 61 % more or 87 kW
      Displacement 8.3 l. and 4.5 l. 46 % more or 3.8 l.
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Cylinders number 6 and 4 33 % more or 2
      Full power 153 kW and 60 kW 61 % more or 93 kW

      Hydraulic system

      Pump bandwidth 173 l/min and 75.2 l/min 57 % more or 97.8 l/min

      Gear box

      Maximum forward speed 10.2 km/h and 9.2 km/h 10 % more or 1.0 km/h
      Maximum reverse gear 11.9 km/h and 10.8 km/h 9 % more or 1.1 km/h

      Carrier

      Rolling bearings number on either side 8 and 6 25 % more or 2
      Contact with ground area 3.1 m2 and 2.5 m2 19 % more or 0.6 m2
      Track shoes number per side 43 and 37 14 % more or 6

      Neutral reasons:

      Standard blade

      Width 2819.4 mm and 4130 mm
      Height 840 mm and 1120 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2820 mm and 2810 mm
      Height to cab upper part 2660 mm and 3450 mm

      Operation

      Working weight 7997 kg and 20260 kg
      Operating voltage 12 V and 12 V

      Motor

      Aspiration 4-stroke diesel engine, natural aspiration, direct run, direct injection and Turbocharger with charge air cooling
      Manufacturer Cummins and Cummins
      Model B4.5 and QSC 8.3

      Hydraulic system

      Type of pump Pump with double gear and Pump with twin gear, actuated with torque converter.
      Overflow valve pressure 15512 kPa and 17236.9 kPa

      Gear box

      Transmission type Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds and Power switching of modular of intermediate type.
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 610 mm and 508 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2820 mm 2. Width between caterpillar tracks 2810 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 3450 mm
      5. Clearance 323 mm 5. Clearance 445 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 508 mm