vs.

      Dressta TD7M LGP vs. John Deere 450J LT

      12 reasons to buy Dressta TD7M LGP:

      Operation

      Cooling system fluid volume 24.9 l. and 16 l. 36 % more or 8.9 l.
      Hydraulic system fluid volume 70 l. and 32.2 l. 54 % more or 37.8 l.
      Power unit fluid volume 70 l. and 42.7 l. 39 % more or 27.3 l.
      Final drive fluid volume 9.5 l. and 6.6 l. 31 % more or 2.9 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Effective power 55 kW and 52 kW 5 % more or 3 kW

      Hydraulic system

      Pump bandwidth 75.2 l/min and 56.8 l/min 24 % more or 18.4 l/min

      Gear box

      Maximum reverse gear 10.8 km/h and 8 km/h 26 % more or 2.8 km/h
      Maximum forward speed 9.2 km/h and 8 km/h 13 % more or 1.2 km/h

      Carrier

      Specific ground pressure 31 kPa and 40.7 kPa 24 % less or 9.7 kPa
      Contact with ground area 2.5 m2 and 1.8 m2 28 % more or 0.7 m2

      5 reasons to buy John Deere 450J LT:

      Standard blade

      Cut depth 528 mm and 279 mm 47 % more or 249 mm
      Blade angle in both directions 25.4 degrees and 25 degrees 2 % more or 0.4 degrees

      Sizes

      Clearance 345 mm and 323 mm 6 % more or 22 mm

      Operation

      Fuel Capacity 178 l. and 170 l. 4 % more or 8 l.

      Carrier

      Track shoes number per side 40 and 37 7 % more or 3

      Neutral reasons:

      Standard blade

      Width 2819.4 mm and 2464 mm
      Height 840 mm and 826 mm
      Volume 1.5 m3 and 1.5 m3

      Sizes

      Width between caterpillar tracks 2820 mm and 1854 mm
      Height to cab upper part 2660 mm and 2743 mm
      Length with blade 4776 mm and 3937 mm

      Operation

      Working weight 7997 kg and 7401 kg
      Operating voltage 12 V and 12 V

      Motor

      Displacement 4.5 l. and 4.5 l.
      Manufacturer Cummins and John Deere
      Aspiration 4-stroke diesel engine, natural aspiration, direct run, direct injection and Turbocharging with atmospheric pressure compensation
      Model B4.5 and 4045T
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump Pump with double gear and gear type pump
      Overflow valve pressure 15512 kPa and 20684.3 kPa

      Gear box

      Transmission type Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds and Hydro-Static Transmission

      Carrier

      Standard shoe size 610 mm and 406 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track pitch 165 mm and 159.8 mm

      Images

      Sizes

      5. Clearance 323 mm 5. Clearance 345 mm
      1. Length with blade 4776 mm 1. Length with blade 3937 mm
      2. Width between caterpillar tracks 2820 mm 2. Width between caterpillar tracks 1854 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 2743 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 406 mm