vs.

      Dressta TD7M LGP vs. John Deere 650J XLT

      12 reasons to buy Dressta TD7M LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 22.2 degrees 11 % more or 2.8 degrees

      Operation

      Cooling system fluid volume 24.9 l. and 16 l. 36 % more or 8.9 l.
      Hydraulic system fluid volume 70 l. and 32.2 l. 54 % more or 37.8 l.
      Power unit fluid volume 70 l. and 42.7 l. 39 % more or 27.3 l.
      Final drive fluid volume 9.5 l. and 6.6 l. 31 % more or 2.9 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Hydraulic system

      Pump bandwidth 75.2 l/min and 57 l/min 24 % more or 18.2 l/min

      Gear box

      Maximum forward speed 9.2 km/h and 8 km/h 13 % more or 1.2 km/h
      Maximum reverse gear 10.8 km/h and 8 km/h 26 % more or 2.8 km/h

      Carrier

      Specific ground pressure 31 kPa and 38.6 kPa 20 % less or 7.6 kPa
      Contact with ground area 2.5 m2 and 2.1 m2 16 % more or 0.4 m2

      7 reasons to buy John Deere 650J XLT:

      Standard blade

      Volume 2 m3 and 1.5 m3 25 % more or 0.5 m3
      Cut depth 500 mm and 279 mm 44 % more or 221 mm

      Sizes

      Clearance 363 mm and 323 mm 11 % more or 40 mm

      Operation

      Fuel Capacity 178 l. and 170 l. 4 % more or 8 l.

      Motor

      Effective power 67 kW and 55 kW 18 % more or 12 kW

      Carrier

      Track shoes number per side 40 and 37 7 % more or 3
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 2819.4 mm and 2667 mm
      Height 840 mm and 933 mm

      Sizes

      Length with blade 4776 mm and 4254 mm
      Width between caterpillar tracks 2820 mm and 2006 mm
      Height to cab upper part 2660 mm and 2768 mm

      Operation

      Working weight 7997 kg and 8455 kg
      Operating voltage 12 V and 12 V

      Motor

      Aspiration 4-stroke diesel engine, natural aspiration, direct run, direct injection and Turbocharging with atmospheric pressure compensation
      Displacement 4.5 l. and 4.5 l.
      Manufacturer Cummins and John Deere
      Model B4.5 and 4045T
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump Pump with double gear and gear type pump
      Overflow valve pressure 15512 kPa and 20670 kPa

      Gear box

      Transmission type Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds and Hydro-Static Transmission

      Carrier

      Caterpillar track pitch 165 mm and 170 mm
      Standard shoe size 610 mm and 457 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2820 mm 2. Width between caterpillar tracks 2006 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 2768 mm
      5. Clearance 323 mm 5. Clearance 363 mm
      1. Length with blade 4776 mm 1. Length with blade 4254 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 457 mm