vs.

      Dressta TD7M vs. Caterpillar D6R XW serie II

      1 reasons to buy Dressta TD7M:

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      12 reasons to buy Caterpillar D6R XW serie II:

      Standard blade

      Volume 5.7 m3 and 1.4 m3 75 % more or 4.3 m3
      Cut depth 459 mm and 279 mm 39 % more or 180 mm

      Sizes

      Clearance 383 mm and 323 mm 16 % more or 60 mm

      Operation

      Fuel Capacity 382.3 l. and 170 l. 56 % more or 212.3 l.

      Motor

      Full power 138 kW and 60 kW 57 % more or 78 kW
      Cylinders number 6 and 4 33 % more or 2
      Displacement 8.8 l. and 4.5 l. 49 % more or 4.3 l.

      Gear box

      Maximum forward speed 12.4 km/h and 9.2 km/h 26 % more or 3.2 km/h
      Maximum reverse gear 16.1 km/h and 10.8 km/h 33 % more or 5.3 km/h

      Carrier

      Specific ground pressure 44.8 kPa and 51 kPa 12 % less or 6.2 kPa
      Contact with ground area 4.3 m2 and 1.4 m2 67 % more or 2.9 m2
      Rolling bearings number on either side 7 and 5 29 % more or 2

      Neutral reasons:

      Standard blade

      Height 69.9 mm and 1412 mm
      Width 2615.2 mm and 3560 mm

      Sizes

      Length with blade 4060 mm and 5430 mm
      Height to cab upper part 2660 mm and 3200 mm

      Operation

      Working weight 7348 kg and 19907.3 kg

      Motor

      Model B4.5 and C9
      Manufacturer Cummins and Caterpillar

      Gear box

      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 381 mm and 762 mm

      Images

      Sizes

      3. Height to cab upper part 2660 mm 3. Height to cab upper part 3200 mm
      5. Clearance 323 mm 5. Clearance 383 mm
      1. Length with blade 4060 mm 1. Length with blade 5430 mm

      Carrier

      8. Standard shoe size 381 mm 8. Standard shoe size 762 mm