vs.

      Dressta TD7M vs. John Deere 950C

      2 reasons to buy Dressta TD7M:

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev

      Carrier

      Specific ground pressure 51 kPa and 74.5 kPa 32 % less or 23.5 kPa

      17 reasons to buy John Deere 950C:

      Standard blade

      Volume 7.2 m3 and 1.4 m3 81 % more or 5.8 m3
      Cut depth 525 mm and 279 mm 47 % more or 246 mm

      Sizes

      Clearance 482 mm and 323 mm 33 % more or 159 mm

      Operation

      Fuel Capacity 450 l. and 170 l. 62 % more or 280 l.
      Cooling system fluid volume 64.4 l. and 24.9 l. 61 % more or 39.5 l.
      Hydraulic system fluid volume 178 l. and 70 l. 61 % more or 108 l.
      Power unit fluid volume 178 l. and 70 l. 61 % more or 108 l.
      Final drive fluid volume 14.5 l. and 9.5 l. 34 % more or 5.0 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 171.5 kW and 55 kW 68 % more or 116.5 kW
      Displacement 10 l. and 4.5 l. 55 % more or 5.5 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 75.2 l/min 74 % more or 216.8 l/min

      Gear box

      Maximum reverse gear 11 km/h and 10.8 km/h 2 % more or 0.2 km/h
      Maximum forward speed 11 km/h and 9.2 km/h 16 % more or 1.8 km/h

      Carrier

      Track shoes number per side 39 and 34 13 % more or 5
      Rolling bearings number on either side 7 and 5 29 % more or 2
      Contact with ground area 3 m2 and 1.4 m2 53 % more or 1.6 m2

      Neutral reasons:

      Standard blade

      Width 2615.2 mm and 3965 mm
      Height 69.9 mm and 1450 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length with blade 4060 mm and 5680 mm
      Height to cab upper part 2660 mm and 3305 mm

      Operation

      Working weight 7348 kg and 22950 kg
      Operating voltage 12 V and 24 V

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Model B4.5 and D926 TI
      Aspiration 4-stroke diesel engine, natural aspiration, direct run, direct injection and Turbocharging with intercooler
      Manufacturer Cummins and Liebherr

      Hydraulic system

      Type of pump Pump with double gear and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 15512 kPa and 16000 kPa

      Gear box

      Transmission type Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds and Electronically controlled closed loop hydrostatic drive with a split power flow
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 381 mm and 508 mm
      Caterpillar track pitch 165 mm and 215.9 mm

      Images

      Sizes

      1. Length with blade 4060 mm 1. Length with blade 5680 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 3305 mm
      5. Clearance 323 mm 5. Clearance 482 mm

      Carrier

      8. Standard shoe size 381 mm 8. Standard shoe size 508 mm