vs.

      Dressta TD7M vs. New Holland D75 LT

      3 reasons to buy Dressta TD7M:

      Operation

      Cooling system fluid volume 24.9 l. and 18.9 l. 24 % more or 6.0 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev
      Full power 60 kW and 59.7 kW 0 % more or 0.3 kW

      14 reasons to buy New Holland D75 LT:

      Standard blade

      Volume 1.5 m3 and 1.4 m3 7 % more or 0.1 m3
      Cut depth 457 mm and 279 mm 39 % more or 178 mm

      Sizes

      Clearance 383 mm and 323 mm 16 % more or 60 mm

      Operation

      Fuel Capacity 189.3 l. and 170 l. 10 % more or 19.3 l.
      Hydraulic system fluid volume 75.7 l. and 70 l. 8 % more or 5.7 l.
      Final drive fluid volume 14.2 l. and 9.5 l. 33 % more or 4.7 l.

      Motor

      Effective power 55.9 kW and 55 kW 2 % more or 0.9 kW
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump bandwidth 76.8 l/min and 75.2 l/min 2 % more or 1.6 l/min

      Gear box

      Forward gears number 10 and 3 70 % more or 7
      Maximum forward speed 9.7 km/h and 9.2 km/h 5 % more or 0.5 km/h

      Carrier

      Rolling bearings number on either side 6 and 5 17 % more or 1
      Specific ground pressure 44.6 kPa and 51 kPa 13 % less or 6.4 kPa
      Track shoes number per side 38 and 34 11 % more or 4

      Neutral reasons:

      Standard blade

      Width 2615.2 mm and 2490 mm
      Height 69.9 mm and 910 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length with blade 4060 mm and 4126 mm
      Height to cab upper part 2660 mm and 2773 mm

      Operation

      Working weight 7348 kg and 8256 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Cummins and New Holland
      Model B4.5 and 445T/M2
      Displacement 4.5 l. and 4.5 l.
      Cylinders number 4 and 4
      Aspiration 4-stroke diesel engine, natural aspiration, direct run, direct injection and natural aspiration

      Hydraulic system

      Type of pump Pump with double gear and gear type pump

      Gear box

      Transmission type Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds and Hydro-Static Transmission

      Carrier

      Caterpillar track pitch 165 mm and 171 mm
      Standard shoe size 381 mm and 410 mm

      Images

      Sizes

      1. Length with blade 4060 mm 1. Length with blade 4126 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 2773 mm
      5. Clearance 323 mm 5. Clearance 383 mm

      Carrier

      8. Standard shoe size 381 mm 8. Standard shoe size 410 mm