vs.

      John Deere 1050J Waste Pickup Loader vs. John Deere 950C LT

      15 reasons to buy John Deere 1050J Waste Pickup Loader:

      Standard blade

      Volume 19.7 m3 and 7.2 m3 63 % more or 12.5 m3
      Cut depth 570 mm and 525 mm 8 % more or 45 mm

      Sizes

      Clearance 635 mm and 482 mm 24 % more or 153 mm

      Operation

      Engine oil volume 34 l. and 25.5 l. 25 % more or 8.5 l.
      Hydraulic system fluid volume 210 l. and 178 l. 15 % more or 32 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Power unit fluid volume 210 l. and 178 l. 15 % more or 32 l.
      Final drive fluid volume 19 l. and 14.5 l. 24 % more or 4.5 l.
      Fuel Capacity 650 l. and 450 l. 31 % more or 200 l.

      Motor

      Effective power 250 kW and 171.5 kW 31 % more or 78.5 kW
      Maximum torque 1700 Nm and 1080.6 Nm 36 % more or 619.4 Nm
      Displacement 12 l. and 10 l. 17 % more or 2 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Carrier

      Contact with ground area 3.9 m2 and 3.3 m2 15 % more or 0.6 m2
      Track shoes number per side 44 and 43 2 % more or 1

      6 reasons to buy John Deere 950C LT:

      Operation

      Cooling system fluid volume 64.4 l. and 57 l. 11 % more or 7.4 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 257 l/min 12 % more or 35 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.9 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 11 km/h and 10.9 km/h 1 % more or 0.1 km/h

      Carrier

      Specific ground pressure 71 kPa and 95.1 kPa 25 % less or 24.1 kPa
      Rolling bearings number on either side 8 and 7 12 % more or 1

      Neutral reasons:

      Standard blade

      Width 4030 mm and 3965 mm
      Height 2390 mm and 1450 mm

      Sizes

      Width between caterpillar tracks 2790 mm and 2974 mm
      Height to cab upper part 3630 mm and 3305 mm
      Caterpillar track length on ground level 3175 mm and 3275 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 36727 kg and 23700 kg

      Motor

      Power measured at 1800 rev / min and 1800 rev / min
      Manufacturer Liebherr and Liebherr
      Model D 946-L A6 and D 926 TI
      Aspiration Turbocharging with intercooler and Turbocharging with intercooler
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump alternating axial piston and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 25510.6 kPa and 16000 kPa

      Gear box

      Transmission type Hydro-Static Transmission and Electronically controlled closed loop hydrostatic drive with a split power flow

      Carrier

      Caterpillar track pitch 220 mm and 215.9 mm
      Track width 2180 mm and 1980 mm

      Images

      Sizes

      5. Clearance 635 mm 5. Clearance 482 mm
      2. Width between caterpillar tracks 2790 mm 2. Width between caterpillar tracks 2974 mm
      3. Height to cab upper part 3630 mm 3. Height to cab upper part 3305 mm
      4. Caterpillar track length on ground level 3175 mm 4. Caterpillar track length on ground level 3275 mm

      Carrier

      7. Track width 2180 mm 7. Track width 1980 mm