vs.

      John Deere 400G vs. Komatsu D61EX-12

      7 reasons to buy John Deere 400G:

      Standard blade

      Blade angle in both directions 50 degrees and 25 degrees 50 % more or 25 degrees

      Operation

      Generator current strength 65 amperes and 35 amperes 46 % more or 30 amperes
      Final drive fluid volume 53 l. and 28.5 l. 46 % more or 24.5 l.

      Motor

      Power measured at 2100 rev / min and 1850 rev / min 12 % more or 250 rev

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 42 kPa and 43.6 kPa 4 % less or 1.6 kPa

      13 reasons to buy Komatsu D61EX-12:

      Standard blade

      Cut depth 575 mm and 522 mm 9 % more or 53 mm

      Operation

      Hydraulic system fluid volume 48 l. and 32.2 l. 33 % more or 15.8 l.
      Fuel Capacity 315 l. and 117.3 l. 63 % more or 197.7 l.
      Cooling system fluid volume 44 l. and 12.3 l. 72 % more or 31.7 l.

      Motor

      Effective power 113.3 kW and 44.7 kW 61 % more or 68.6 kW
      Maximum torque 784 Nm and 254.9 Nm 67 % more or 529.1 Nm
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 10.3 km/h and 10 km/h 3 % more or 0.3 km/h
      Maximum reverse gear 12.8 km/h and 9.5 km/h 26 % more or 3.3 km/h

      Carrier

      Contact with ground area 3.8 m2 and 1.3 m2 66 % more or 2.5 m2
      Track shoes number per side 46 and 36 22 % more or 10
      Rolling bearings number on either side 8 and 5 37 % more or 3

      Neutral reasons:

      Standard blade

      Width 2286 mm and 3275 mm
      Height 727 mm and 1200 mm

      Sizes

      Caterpillar track length on ground level 1979 mm and 3170 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 5362 kg and 16900 kg

      Motor

      Manufacturer John Deere and Komatsu
      Model 4039D and S6D114E-1
      Torque measured at 1300 rev / min and 1300 rev / min

      Hydraulic system

      Type of pump gear type pump and load sensing, pressure control, with locking in the middle position
      Overflow valve pressure 18961 kPa and 20600 kPa

      Gear box

      Transmission type Higher-Low-Reverse gear with direct drive and TORQFLOW

      Carrier

      Standard shoe size 356 mm and 600 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 1979 mm 4. Caterpillar track length on ground level 3170 mm

      Carrier

      8. Standard shoe size 356 mm 8. Standard shoe size 600 mm