vs.

      John Deere 450G vs. Dressta TD10M

      4 reasons to buy John Deere 450G:

      Standard blade

      Cut depth 504 mm and 305 mm 39 % more or 199 mm

      Operation

      Power unit fluid volume 102 l. and 70 l. 31 % more or 32 l.

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      18 reasons to buy Dressta TD10M:

      Standard blade

      Volume 2 m3 and 1.5 m3 25 % more or 0.5 m3

      Sizes

      Clearance 381 mm and 362 mm 5 % more or 19 mm

      Operation

      Hydraulic system fluid volume 70 l. and 37.8 l. 46 % more or 32.2 l.
      Final drive fluid volume 15.1 l. and 6.6 l. 56 % more or 8.5 l.
      Fuel Capacity 170 l. and 155.2 l. 9 % more or 14.8 l.
      Cooling system fluid volume 24.9 l. and 17 l. 32 % more or 7.9 l.
      Engine oil volume 10.4 l. and 8.5 l. 18 % more or 1.9 l.

      Motor

      Full power 82 kW and 54.4 kW 34 % more or 27.6 kW
      Effective power 76 kW and 52.2 kW 31 % more or 23.8 kW
      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Pump bandwidth 75.2 l/min and 64 l/min 15 % more or 11.2 l/min

      Gear box

      Maximum forward speed 10 km/h and 9.5 km/h 5 % more or 0.5 km/h
      Maximum reverse gear 11.9 km/h and 9.5 km/h 20 % more or 2.4 km/h

      Carrier

      Specific ground pressure 38.6 kPa and 45.2 kPa 15 % less or 6.6 kPa
      Contact with ground area 2.2 m2 and 1.6 m2 27 % more or 0.6 m2
      Track shoes number per side 39 and 37 5 % more or 2
      Rolling bearings number on either side 6 and 5 17 % more or 1

      Neutral reasons:

      Standard blade

      Width 2464 mm and 282 mm
      Height 827 mm and 990 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 2740 mm and 2720 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 7243 kg and 8797 kg

      Motor

      Manufacturer John Deere and Cummins
      Model 4045T and QSB4.5
      Displacement 4.5 l. and 4.5 l.
      Cylinders number 4 and 4
      Aspiration Turbocharging with atmospheric pressure compensation and turbocharging

      Hydraulic system

      Type of pump system with open center and Pump with double gear
      Overflow valve pressure 18961 kPa and 15512 kPa

      Gear box

      Transmission type powershift and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 406 mm and 508 mm
      Caterpillar track pitch 1450 mm and 165 mm

      Images

      Sizes

      3. Height to cab upper part 2740 mm 3. Height to cab upper part 2720 mm
      5. Clearance 362 mm 5. Clearance 381 mm

      Carrier

      8. Standard shoe size 406 mm 8. Standard shoe size 508 mm