- Home/
- Comparison/
- Tracked Tractor/
- John Deere 450H Propane vs. John Deere 650J LT
John Deere 450H Propane vs. John Deere 650J LT
4 reasons to buy John Deere 450H Propane:
Standard blade
Cut depth | 528 mm and 500 mm | 5 % more or 28 mm |
Carrier
Specific ground pressure | 27.6 kPa and 40.6 kPa | 32 % less or 13.0 kPa |
Contact with ground area | 2.7 m2 and 2 m2 | 26 % more or 0.7 m2 |
Track shoes number per side | 40 and 38 | 5 % more or 2 |
5 reasons to buy John Deere 650J LT:
Standard blade
Volume | 2 m3 and 1.5 m3 | 25 % more or 0.5 m3 |
Sizes
Clearance | 363 mm and 346 mm | 5 % more or 17 mm |
Operation
Fuel Capacity | 178 l. and 136 l. | 24 % more or 42 l. |
Motor
Effective power | 67 kW and 55.2 kW | 18 % more or 11.8 kW |
Maximum torque | 416 Nm and 344.4 Nm | 17 % more or 71.6 Nm |
Neutral reasons:
Standard blade
Blade angle in both directions | 22.2 degrees and 22.2 degrees |
Width | 2464 mm and 2667 mm |
Height | 826 mm and 933 mm |
Sizes
Width between caterpillar tracks | 610 mm and 2006 mm |
Height to cab upper part | 2590 mm and 2768 mm |
Caterpillar track length on ground level | 2184 mm and 2210 mm |
Operation
Power unit fluid volume | 42.7 l. and 42.7 l. |
Generator current strength | 65 amperes and 65 amperes |
Final drive fluid volume | 6.6 l. and 6.6 l. |
Operating voltage | 12 V and 12 V |
Working weight | 7500 kg and 8436 kg |
Cooling system fluid volume | 16 l. and 16 l. |
Engine oil volume | 14 l. and 14 l. |
Hydraulic system fluid volume | 32.2 l. and 32.2 l. |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Model | 4045T and 4045H |
Displacement | 4.5 l. and 4.5 l. |
Torque measured at | 1200 rev / min and 1200 rev / min |
Cylinders number | 4 and 4 |
Aspiration | Turbocharging with atmospheric pressure compensation and Turbocharging with atmospheric pressure compensation |
Manufacturer | John Deere and John Deere |
Hydraulic system
Pump bandwidth | 56.8 l/min and 56.8 l/min |
Type of pump | gear type pump and gear type pump |
Overflow valve pressure | 20685 kPa and 20684.3 kPa |
Gear box
Transmission type | Electronically controlled hydrostatic drive with a split power flow and Hydro-Static Transmission |
Maximum forward speed | 8 km/h and 8 km/h |
Maximum reverse gear | 8 km/h and 8 km/h |
Carrier
Standard shoe size | 610 mm and 457 mm |
Rolling bearings number on either side | 6 and 6 |
Caterpillar track pitch | 159.8 mm and 171 mm |
Images
Sizes
2. Width between caterpillar tracks | 610 mm | 2. Width between caterpillar tracks | 2006 mm |
3. Height to cab upper part | 2590 mm | 3. Height to cab upper part | 2768 mm |
4. Caterpillar track length on ground level | 2184 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 346 mm | 5. Clearance | 363 mm |
Carrier
8. Standard shoe size | 610 mm | 8. Standard shoe size | 457 mm |