vs.

      John Deere 450H vs. New Holland D150 LGP

      2 reasons to buy John Deere 450H:

      Standard blade

      Blade angle in both directions 25.4 degrees and 5 degrees 80 % more or 20.4 degrees

      Carrier

      Contact with ground area 15897 m2 and 47.8 m2 100 % more or 15849.2 m2

      19 reasons to buy New Holland D150 LGP:

      Standard blade

      Cut depth 590 mm and 528 mm 11 % more or 62 mm
      Volume 3.2 m3 and 1.4 m3 56 % more or 1.8 m3

      Sizes

      Clearance 370 mm and 346 mm 6 % more or 24 mm

      Operation

      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes
      Fuel Capacity 270 l. and 136 l. 50 % more or 134 l.
      Cooling system fluid volume 25 l. and 16 l. 36 % more or 9 l.
      Engine oil volume 14.2 l. and 14 l. 1 % more or 0.2 l.
      Hydraulic system fluid volume 63 l. and 32.2 l. 49 % more or 30.8 l.
      Final drive fluid volume 26 l. and 6.6 l. 75 % more or 19.4 l.

      Motor

      Effective power 104.4 kW and 52.2 kW 50 % more or 52.2 kW
      Maximum torque 650 Nm and 302.3 Nm 53 % more or 347.7 Nm
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 11 km/h and 8 km/h 27 % more or 3 km/h
      Maximum reverse gear 13 km/h and 8 km/h 38 % more or 5 km/h

      Carrier

      Specific ground pressure 34.3 kPa and 42.1 kPa 19 % less or 7.8 kPa
      Track shoes number per side 48 and 37 23 % more or 11
      Rolling bearings number on either side 8 and 5 37 % more or 3

      Neutral reasons:

      Standard blade

      Width 2286 mm and 4000 mm
      Height 826 mm and 1000 mm

      Sizes

      Length without blade 3937 mm and 4010 mm
      Width between caterpillar tracks 406 mm and 2940 mm
      Height to cab upper part 2590 mm and 3080 mm
      Caterpillar track length on ground level 1956 mm and 2985 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 6818 kg and 16610 kg

      Motor

      Power measured at 2200 rev / min and 2200 rev / min
      Model 4045D and 6BTAA5.9
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Cummins

      Hydraulic system

      Type of pump gear type pump and variable displacement piston pump
      Overflow valve pressure 20685 kPa and 19000 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and Powershift, camshaft, full mesh

      Carrier

      Standard shoe size 406 mm and 800 mm

      Images

      Sizes

      6. Length without blade 3937 mm 6. Length without blade 4010 mm
      2. Width between caterpillar tracks 406 mm 2. Width between caterpillar tracks 2940 mm
      3. Height to cab upper part 2590 mm 3. Height to cab upper part 3080 mm
      4. Caterpillar track length on ground level 1956 mm 4. Caterpillar track length on ground level 2985 mm
      5. Clearance 346 mm 5. Clearance 370 mm

      Carrier

      8. Standard shoe size 406 mm 8. Standard shoe size 800 mm