vs.

      John Deere 450J LT vs. John Deere 455G

      12 reasons to buy John Deere 450J LT:

      Standard blade

      Volume 1.5 m3 and 1 m3 33 % more or 0.5 m3
      Blade angle in both directions 25.4 degrees and 25 degrees 2 % more or 0.4 degrees
      Cut depth 528 mm and 135 mm 74 % more or 393 mm

      Sizes

      Clearance 345 mm and 330 mm 4 % more or 15 mm

      Operation

      Fuel Capacity 178 l. and 155.2 l. 13 % more or 22.8 l.
      Engine oil volume 14 l. and 8.5 l. 39 % more or 5.5 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum torque 318 Nm and 309.1 Nm 3 % more or 8.9 Nm

      Carrier

      Contact with ground area 1.8 m2 and 1.4 m2 22 % more or 0.4 m2
      Track shoes number per side 40 and 37 7 % more or 3
      Specific ground pressure 40.7 kPa and 60.7 kPa 33 % less or 20.0 kPa
      Rolling bearings number on either side 6 and 5 17 % more or 1

      9 reasons to buy John Deere 455G:

      Operation

      Cooling system fluid volume 17 l. and 16 l. 6 % more or 1 l.
      Hydraulic system fluid volume 68.1 l. and 32.2 l. 53 % more or 35.9 l.
      Power unit fluid volume 102 l. and 42.7 l. 58 % more or 59.3 l.
      Generator current strength 95 amperes and 65 amperes 32 % more or 30 amperes

      Motor

      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Effective power 52.2 kW and 52 kW 0 % more or 0.2 kW

      Hydraulic system

      Pump bandwidth 118 l/min and 56.8 l/min 52 % more or 61.2 l/min

      Gear box

      Maximum forward speed 9.5 km/h and 8 km/h 16 % more or 1.5 km/h
      Maximum reverse gear 10.3 km/h and 8 km/h 22 % more or 2.3 km/h

      Neutral reasons:

      Standard blade

      Width 2464 mm and 1970 mm

      Sizes

      Height to cab upper part 2743 mm and 2708 mm
      Caterpillar track length on ground level 2184 mm and 1930 mm

      Operation

      Working weight 7401 kg and 8503 kg
      Final drive fluid volume 6.6 l. and 6.6 l.
      Operating voltage 12 V and 12 V

      Motor

      Displacement 4.5 l. and 4.5 l.
      Aspiration Turbocharging with atmospheric pressure compensation and Turbocharging with atmospheric pressure compensation
      Cylinders number 4 and 4
      Manufacturer John Deere and John Deere
      Model 4045T and 4045T

      Hydraulic system

      Type of pump gear type pump and gear type pump
      Overflow valve pressure 20684.3 kPa and 17927 kPa

      Gear box

      Transmission type Hydro-Static Transmission and Powershift, dual shifting with torque converter

      Carrier

      Standard shoe size 406 mm and 356 mm
      Caterpillar track pitch 159.8 mm and 159.8 mm

      Images

      Sizes

      3. Height to cab upper part 2743 mm 3. Height to cab upper part 2708 mm
      4. Caterpillar track length on ground level 2184 mm 4. Caterpillar track length on ground level 1930 mm
      5. Clearance 345 mm 5. Clearance 330 mm

      Carrier

      8. Standard shoe size 406 mm 8. Standard shoe size 356 mm