vs.

      John Deere 455G vs. Dressta TD7M LGP

      6 reasons to buy John Deere 455G:

      Sizes

      Clearance 330 mm and 323 mm 2 % more or 7 mm

      Operation

      Power unit fluid volume 102 l. and 70 l. 31 % more or 32 l.

      Hydraulic system

      Pump bandwidth 118 l/min and 75.2 l/min 36 % more or 42.8 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 9.5 km/h and 9.2 km/h 3 % more or 0.3 km/h

      13 reasons to buy Dressta TD7M LGP:

      Standard blade

      Volume 1.5 m3 and 1 m3 33 % more or 0.5 m3
      Cut depth 279 mm and 135 mm 52 % more or 144 mm

      Operation

      Final drive fluid volume 9.5 l. and 6.6 l. 31 % more or 2.9 l.
      Fuel Capacity 170 l. and 155.2 l. 9 % more or 14.8 l.
      Cooling system fluid volume 24.9 l. and 17 l. 32 % more or 7.9 l.
      Hydraulic system fluid volume 70 l. and 68.1 l. 3 % more or 1.9 l.

      Motor

      Full power 60 kW and 54.4 kW 9 % more or 5.6 kW
      Effective power 55 kW and 52.2 kW 5 % more or 2.8 kW
      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev

      Gear box

      Maximum reverse gear 10.8 km/h and 10.3 km/h 5 % more or 0.5 km/h

      Carrier

      Specific ground pressure 31 kPa and 60.7 kPa 49 % less or 29.7 kPa
      Contact with ground area 2.5 m2 and 1.4 m2 44 % more or 1.1 m2
      Rolling bearings number on either side 6 and 5 17 % more or 1

      Neutral reasons:

      Standard blade

      Width 1970 mm and 2819.4 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 2708 mm and 2660 mm

      Operation

      Working weight 8503 kg and 7997 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Aspiration Turbocharging with atmospheric pressure compensation and 4-stroke diesel engine, natural aspiration, direct run, direct injection
      Manufacturer John Deere and Cummins
      Model 4045T and B4.5
      Displacement 4.5 l. and 4.5 l.
      Torque measured at 1300 rev / min and 1300 rev / min

      Hydraulic system

      Type of pump gear type pump and Pump with double gear
      Overflow valve pressure 17927 kPa and 15512 kPa

      Gear box

      Transmission type Powershift, dual shifting with torque converter and Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds

      Carrier

      Standard shoe size 356 mm and 610 mm
      Track shoes number per side 37 and 37
      Caterpillar track pitch 159.8 mm and 165 mm

      Images

      Sizes

      3. Height to cab upper part 2708 mm 3. Height to cab upper part 2660 mm
      5. Clearance 330 mm 5. Clearance 323 mm

      Carrier

      8. Standard shoe size 356 mm 8. Standard shoe size 610 mm