vs.

      John Deere 455G vs. John Deere 1050C

      6 reasons to buy John Deere 455G:

      Operation

      Generator current strength 95 amperes and 55 amperes 42 % more or 40 amperes

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 60.7 kPa and 93 kPa 35 % less or 32.3 kPa

      19 reasons to buy John Deere 1050C:

      Standard blade

      Volume 9.5 m3 and 1 m3 89 % more or 8.5 m3
      Cut depth 570 mm and 135 mm 76 % more or 435 mm

      Sizes

      Clearance 625 mm and 330 mm 47 % more or 295 mm

      Operation

      Fuel Capacity 610 l. and 155.2 l. 75 % more or 454.8 l.
      Cooling system fluid volume 68 l. and 17 l. 75 % more or 51 l.
      Engine oil volume 24 l. and 8.5 l. 65 % more or 15.5 l.
      Hydraulic system fluid volume 210 l. and 68.1 l. 68 % more or 141.9 l.
      Power unit fluid volume 210 l. and 102 l. 51 % more or 108 l.
      Final drive fluid volume 21 l. and 6.6 l. 69 % more or 14.4 l.

      Motor

      Effective power 241.6 kW and 52.2 kW 78 % more or 189.4 kW
      Maximum torque 1530.7 Nm and 309.1 Nm 80 % more or 1221.6 Nm
      Displacement 13 l. and 4.5 l. 65 % more or 8.5 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 336 l/min and 118 l/min 65 % more or 218 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.5 km/h 14 % more or 1.5 km/h
      Maximum reverse gear 11 km/h and 10.3 km/h 6 % more or 0.7 km/h

      Carrier

      Contact with ground area 3.6 m2 and 1.4 m2 61 % more or 2.2 m2
      Track shoes number per side 44 and 37 16 % more or 7
      Rolling bearings number on either side 7 and 5 29 % more or 2

      Neutral reasons:

      Standard blade

      Width 1970 mm and 4200 mm

      Sizes

      Length without blade 4564 mm and 4885 mm
      Height to cab upper part 2708 mm and 3640 mm
      Caterpillar track length on ground level 1930 mm and 3174 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 8503 kg and 33560 kg

      Motor

      Model 4045T and D 9406 TI-E
      Manufacturer John Deere and Liebherr
      Aspiration Turbocharging with atmospheric pressure compensation and Turbocharging with intercooler

      Hydraulic system

      Type of pump gear type pump and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 17927 kPa and 20000 kPa

      Gear box

      Transmission type Powershift, dual shifting with torque converter and Electronically controlled closed loop hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 356 mm and 560 mm
      Caterpillar track pitch 159.8 mm and 215 mm

      Images

      Sizes

      3. Height to cab upper part 2708 mm 3. Height to cab upper part 3640 mm
      4. Caterpillar track length on ground level 1930 mm 4. Caterpillar track length on ground level 3174 mm
      5. Clearance 330 mm 5. Clearance 625 mm
      6. Length without blade 4564 mm 6. Length without blade 4885 mm

      Carrier

      8. Standard shoe size 356 mm 8. Standard shoe size 560 mm