vs.

      John Deere 455G vs. New Holland D150 XLT

      5 reasons to buy John Deere 455G:

      Standard blade

      Blade angle in both directions 25 degrees and 5 degrees 80 % more or 20 degrees

      Operation

      Hydraulic system fluid volume 68.1 l. and 63 l. 7 % more or 5.1 l.
      Generator current strength 95 amperes and 70 amperes 26 % more or 25 amperes

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      18 reasons to buy New Holland D150 XLT:

      Standard blade

      Volume 3.2 m3 and 1 m3 69 % more or 2.2 m3
      Cut depth 490 mm and 135 mm 72 % more or 355 mm

      Sizes

      Clearance 370 mm and 330 mm 11 % more or 40 mm

      Operation

      Fuel Capacity 270 l. and 155.2 l. 43 % more or 114.8 l.
      Cooling system fluid volume 25 l. and 17 l. 32 % more or 8 l.
      Engine oil volume 14.2 l. and 8.5 l. 40 % more or 5.7 l.
      Final drive fluid volume 26 l. and 6.6 l. 75 % more or 19.4 l.

      Motor

      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.
      Cylinders number 6 and 4 33 % more or 2
      Effective power 104.4 kW and 52.2 kW 50 % more or 52.2 kW
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum torque 650 Nm and 309.1 Nm 52 % more or 340.9 Nm

      Gear box

      Maximum reverse gear 13 km/h and 10.3 km/h 21 % more or 2.7 km/h
      Maximum forward speed 11 km/h and 9.5 km/h 14 % more or 1.5 km/h

      Carrier

      Track shoes number per side 48 and 37 23 % more or 11
      Specific ground pressure 51 kPa and 60.7 kPa 16 % less or 9.7 kPa
      Rolling bearings number on either side 8 and 5 37 % more or 3
      Contact with ground area 29.9 m2 and 1.4 m2 95 % more or 28.5 m2

      Neutral reasons:

      Standard blade

      Width 1970 mm and 3200 mm

      Sizes

      Height to cab upper part 2708 mm and 3080 mm
      Caterpillar track length on ground level 1930 mm and 2985 mm
      Length without blade 4564 mm and 4010 mm

      Operation

      Working weight 8503 kg and 15680 kg
      Operating voltage 12 V and 24 V

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Aspiration Turbocharging with atmospheric pressure compensation and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Cummins
      Model 4045T and 6BTAA5.9

      Hydraulic system

      Type of pump gear type pump and variable displacement piston pump
      Overflow valve pressure 17927 kPa and 19000 kPa

      Gear box

      Transmission type Powershift, dual shifting with torque converter and Powershift, camshaft, full mesh

      Carrier

      Standard shoe size 356 mm and 500 mm

      Images

      Sizes

      3. Height to cab upper part 2708 mm 3. Height to cab upper part 3080 mm
      4. Caterpillar track length on ground level 1930 mm 4. Caterpillar track length on ground level 2985 mm
      5. Clearance 330 mm 5. Clearance 370 mm
      6. Length without blade 4564 mm 6. Length without blade 4010 mm

      Carrier

      8. Standard shoe size 356 mm 8. Standard shoe size 500 mm