vs.

      John Deere 550J LT vs. John Deere 950C

      4 reasons to buy John Deere 550J LT:

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Carrier

      Specific ground pressure 37.9 kPa and 74.5 kPa 49 % less or 36.6 kPa
      Track shoes number per side 40 and 39 2 % more or 1

      20 reasons to buy John Deere 950C:

      Standard blade

      Volume 7.2 m3 and 1.6 m3 78 % more or 5.6 m3
      Blade angle in both directions 25 degrees and 22.2 degrees 11 % more or 2.8 degrees
      Cut depth 525 mm and 523 mm 0 % more or 2 mm

      Sizes

      Clearance 482 mm and 345 mm 28 % more or 137 mm

      Operation

      Final drive fluid volume 14.5 l. and 6.6 l. 54 % more or 7.9 l.
      Cooling system fluid volume 64.4 l. and 16 l. 75 % more or 48.4 l.
      Engine oil volume 25.5 l. and 14 l. 45 % more or 11.5 l.
      Hydraulic system fluid volume 178 l. and 32.2 l. 82 % more or 145.8 l.
      Power unit fluid volume 178 l. and 42.7 l. 76 % more or 135.3 l.
      Fuel Capacity 450 l. and 178 l. 60 % more or 272 l.

      Motor

      Effective power 171.5 kW and 60 kW 65 % more or 111.5 kW
      Maximum torque 1080.6 Nm and 358 Nm 67 % more or 722.6 Nm
      Displacement 10 l. and 4.5 l. 55 % more or 5.5 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 292 l/min and 56.8 l/min 81 % more or 235.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 8 km/h 27 % more or 3 km/h
      Maximum reverse gear 11 km/h and 8 km/h 27 % more or 3 km/h

      Carrier

      Contact with ground area 3 m2 and 2 m2 33 % more or 1 m2
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 2667 mm and 3965 mm
      Height 826 mm and 1450 mm

      Sizes

      Length with blade 4040 mm and 5680 mm
      Width between caterpillar tracks 2006 mm and 2489 mm
      Height to cab upper part 2743 mm and 3305 mm
      Caterpillar track length on ground level 2184 mm and 2960 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 7717 kg and 22950 kg

      Motor

      Model 4045T and D926 TI
      Manufacturer John Deere and Liebherr
      Aspiration Turbocharging with atmospheric pressure compensation and Turbocharging with intercooler

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 16000 kPa
      Type of pump gear type pump and Variable displacement piston pump with load sensing proportional pump flow control

      Gear box

      Transmission type Hydro-Static Transmission and Electronically controlled closed loop hydrostatic drive with a split power flow

      Carrier

      Track width 1550 mm and 1980 mm
      Standard shoe size 457 mm and 508 mm
      Caterpillar track pitch 160 mm and 215.9 mm

      Images

      Sizes

      1. Length with blade 4040 mm 1. Length with blade 5680 mm
      2. Width between caterpillar tracks 2006 mm 2. Width between caterpillar tracks 2489 mm
      3. Height to cab upper part 2743 mm 3. Height to cab upper part 3305 mm
      4. Caterpillar track length on ground level 2184 mm 4. Caterpillar track length on ground level 2960 mm
      5. Clearance 345 mm 5. Clearance 482 mm

      Carrier

      7. Track width 1550 mm 7. Track width 1980 mm
      8. Standard shoe size 457 mm 8. Standard shoe size 508 mm