vs.

      John Deere 650G vs. Caterpillar D3C LGP serie II

      11 reasons to buy John Deere 650G:

      Standard blade

      Volume 1.9 m3 and 1.3 m3 32 % more or 0.6 m3

      Sizes

      Clearance 362 mm and 294 mm 19 % more or 68 mm

      Operation

      Fuel Capacity 155.2 l. and 121 l. 22 % more or 34.2 l.
      Engine oil volume 12.3 l. and 12 l. 2 % more or 0.3 l.
      Generator current strength 65 amperes and 40 amperes 38 % more or 25 amperes

      Motor

      Full power 73.8 kW and 56.7 kW 23 % more or 17.1 kW
      Effective power 67.1 kW and 52.2 kW 22 % more or 14.9 kW

      Hydraulic system

      Pump bandwidth 64 l/min and 55 l/min 14 % more or 9 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Rolling bearings number on either side 6 and 5 17 % more or 1

      11 reasons to buy Caterpillar D3C LGP serie II:

      Standard blade

      Cut depth 424 mm and 420 mm 1 % more or 4 mm

      Operation

      Cooling system fluid volume 20 l. and 17 l. 15 % more or 3 l.
      Hydraulic system fluid volume 57 l. and 56.8 l. 0 % more or 0.2 l.
      Final drive fluid volume 12 l. and 9.5 l. 21 % more or 2.5 l.

      Motor

      Displacement 5.2 l. and 4.5 l. 13 % more or 0.7 l.
      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev

      Gear box

      Maximum reverse gear 11.4 km/h and 9.3 km/h 18 % more or 2.1 km/h
      Maximum forward speed 10.7 km/h and 9.5 km/h 11 % more or 1.2 km/h

      Carrier

      Contact with ground area 2.6 m2 and 2 m2 23 % more or 0.6 m2
      Specific ground pressure 28.3 kPa and 41.4 kPa 32 % less or 13.1 kPa
      Track shoes number per side 39 and 38 3 % more or 1

      Neutral reasons:

      Standard blade

      Width 2667 mm and 3160 mm
      Height 898 mm and 749 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2362 mm and 2290 mm
      Height to cab upper part 2794 mm and 2664 mm
      Length with blade 4070 mm and 4070 mm

      Operation

      Working weight 8414 kg and 7788 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer John Deere and Caterpillar
      Model 4045T and 3204

      Hydraulic system

      Type of pump gear type pump and Gear type pump with single section
      Overflow valve pressure 18961 kPa and 17225 kPa

      Gear box

      Transmission type powershift and planetary powershift transmission

      Carrier

      Standard shoe size 457.2 mm and 635 mm

      Images

      Sizes

      3. Height to cab upper part 2794 mm 3. Height to cab upper part 2664 mm
      5. Clearance 362 mm 5. Clearance 294 mm
      1. Length with blade 4070 mm 1. Length with blade 4070 mm
      2. Width between caterpillar tracks 2362 mm 2. Width between caterpillar tracks 2290 mm

      Carrier

      8. Standard shoe size 457.2 mm 8. Standard shoe size 635 mm