vs.

      John Deere 650H LGP vs. Caterpillar D3C serie II

      12 reasons to buy John Deere 650H LGP:

      Standard blade

      Volume 1.8 m3 and 1.3 m3 28 % more or 0.5 m3
      Cut depth 500 mm and 397 mm 21 % more or 103 mm

      Sizes

      Clearance 363 mm and 294 mm 19 % more or 69 mm

      Operation

      Fuel Capacity 178 l. and 121 l. 32 % more or 57 l.
      Engine oil volume 14 l. and 12 l. 14 % more or 2 l.
      Generator current strength 65 amperes and 40 amperes 38 % more or 25 amperes

      Motor

      Effective power 67.1 kW and 52.2 kW 22 % more or 14.9 kW

      Hydraulic system

      Pump bandwidth 56.8 l/min and 55 l/min 3 % more or 1.8 l/min

      Carrier

      Contact with ground area 3.1 m2 and 1.4 m2 55 % more or 1.7 m2
      Rolling bearings number on either side 6 and 5 17 % more or 1
      Track shoes number per side 38 and 37 3 % more or 1
      Specific ground pressure 27 kPa and 49.6 kPa 46 % less or 22.6 kPa

      8 reasons to buy Caterpillar D3C serie II:

      Standard blade

      Blade angle in both directions 25 degrees and 22.2 degrees 11 % more or 2.8 degrees

      Operation

      Cooling system fluid volume 20 l. and 16 l. 20 % more or 4 l.
      Hydraulic system fluid volume 57 l. and 32.2 l. 44 % more or 24.8 l.
      Final drive fluid volume 8 l. and 6.6 l. 17 % more or 1.4 l.

      Motor

      Displacement 5.2 l. and 4.5 l. 13 % more or 0.7 l.
      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Gear box

      Maximum forward speed 10.7 km/h and 8 km/h 25 % more or 2.7 km/h
      Maximum reverse gear 11.4 km/h and 8 km/h 30 % more or 3.4 km/h

      Neutral reasons:

      Standard blade

      Width 2921 mm and 2413 mm
      Height 826 mm and 840 mm

      Sizes

      Height to cab upper part 2768 mm and 2664 mm
      Caterpillar track length on ground level 2210 mm and 1902 mm
      Length without blade 4064 mm and 2764 mm
      Width between caterpillar tracks 2464 mm and 1780 mm

      Operation

      Working weight 8660 kg and 7001 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer John Deere and Caterpillar
      Model 4045T and 3204

      Hydraulic system

      Type of pump gear type pump and Gear type pump with single section
      Overflow valve pressure 20685 kPa and 17236.9 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and planetary powershift transmission

      Carrier

      Standard shoe size 711 mm and 356 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2464 mm 2. Width between caterpillar tracks 1780 mm
      3. Height to cab upper part 2768 mm 3. Height to cab upper part 2664 mm
      4. Caterpillar track length on ground level 2210 mm 4. Caterpillar track length on ground level 1902 mm
      5. Clearance 363 mm 5. Clearance 294 mm
      6. Length without blade 4064 mm 6. Length without blade 2764 mm

      Carrier

      8. Standard shoe size 711 mm 8. Standard shoe size 356 mm