vs.

      John Deere 650J LGP vs. Case 1150K WT

      1 reasons to buy John Deere 650J LGP:

      Standard blade

      Cut depth 500 mm and 482.6 mm 3 % more or 17.4 mm

      16 reasons to buy Case 1150K WT:

      Standard blade

      Volume 3.2 m3 and 1.8 m3 44 % more or 1.4 m3
      Blade angle in both directions 25 degrees and 22.2 degrees 11 % more or 2.8 degrees

      Sizes

      Clearance 380 mm and 363 mm 4 % more or 17 mm

      Operation

      Fuel Capacity 246.1 l. and 178 l. 28 % more or 68.1 l.
      Cooling system fluid volume 32.2 l. and 16 l. 50 % more or 16.2 l.
      Engine oil volume 15.5 l. and 14 l. 10 % more or 1.5 l.
      Hydraulic system fluid volume 98.4 l. and 32.2 l. 67 % more or 66.2 l.

      Motor

      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Displacement 6.7 l. and 4.5 l. 33 % more or 2.2 l.
      Cylinders number 6 and 4 33 % more or 2
      Effective power 88 kW and 74 kW 16 % more or 14 kW
      Maximum torque 588.4 Nm and 447 Nm 24 % more or 141.4 Nm

      Hydraulic system

      Pump bandwidth 132.1 l/min and 56.8 l/min 57 % more or 75.3 l/min

      Gear box

      Maximum forward speed 9.7 km/h and 8 km/h 18 % more or 1.7 km/h
      Maximum reverse gear 9.7 km/h and 8 km/h 18 % more or 1.7 km/h

      Carrier

      Track shoes number per side 43 and 40 7 % more or 3

      Neutral reasons:

      Standard blade

      Width 2921 mm and 3350 mm
      Height 826 mm and 1120 mm

      Sizes

      Height to cab upper part 2768 mm and 2840 mm
      Caterpillar track length on ground level 2337 mm and 2590 mm
      Length with blade 4254 mm and 5030 mm

      Operation

      Working weight 8977 kg and 13002.2 kg
      Operating voltage 12 V and 24 V
      Generator current strength 65 amperes and 65 amperes

      Motor

      Manufacturer John Deere and Case
      Model 4045T and 667TA/EDJ
      Aspiration Turbocharging with atmospheric pressure compensation and Turbocharging with subsequent air cooling (by a cooling radiator)
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 19512.1 kPa

      Gear box

      Transmission type Hydro-Static Transmission and Hydro-Static Transmission

      Carrier

      Rolling bearings number on either side 7 and 7
      Standard shoe size 711 mm and 762 mm
      Caterpillar track pitch 170 mm and 175.3 mm
      Track width 1753 mm and 1980 mm

      Images

      Sizes

      1. Length with blade 4254 mm 1. Length with blade 5030 mm
      3. Height to cab upper part 2768 mm 3. Height to cab upper part 2840 mm
      4. Caterpillar track length on ground level 2337 mm 4. Caterpillar track length on ground level 2590 mm
      5. Clearance 363 mm 5. Clearance 380 mm

      Carrier

      7. Track width 1753 mm 7. Track width 1980 mm
      8. Standard shoe size 711 mm 8. Standard shoe size 762 mm