vs.

      John Deere 700H LT vs. Case 550H WT

      16 reasons to buy John Deere 700H LT:

      Standard blade

      Volume 2.6 m3 and 1.5 m3 42 % more or 1.1 m3
      Cut depth 500 mm and 495 mm 1 % more or 5 mm

      Sizes

      Clearance 381 mm and 353 mm 7 % more or 28 mm

      Operation

      Fuel Capacity 227 l. and 115.5 l. 49 % more or 111.5 l.
      Cooling system fluid volume 21 l. and 15.6 l. 26 % more or 5.4 l.
      Engine oil volume 19 l. and 9.5 l. 50 % more or 9.5 l.
      Hydraulic system fluid volume 51 l. and 39 l. 24 % more or 12 l.
      Final drive fluid volume 13 l. and 5.7 l. 56 % more or 7.3 l.

      Motor

      Displacement 6.8 l. and 3.9 l. 43 % more or 2.9 l.
      Cylinders number 6 and 4 33 % more or 2
      Full power 91.7 kW and 56 kW 39 % more or 35.7 kW
      Effective power 85.8 kW and 50 kW 42 % more or 35.8 kW
      Maximum torque 555.9 Nm and 245.4 Nm 56 % more or 310.5 Nm

      Hydraulic system

      Pump bandwidth 95 l/min and 82.9 l/min 13 % more or 12.1 l/min

      Carrier

      Contact with ground area 2.5 m2 and 2 m2 20 % more or 0.5 m2
      Track shoes number per side 40 and 37 7 % more or 3

      6 reasons to buy Case 550H WT:

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Maximum reverse gear 10.3 km/h and 8.9 km/h 14 % more or 1.4 km/h
      Maximum forward speed 9.3 km/h and 8.9 km/h 4 % more or 0.4 km/h

      Carrier

      Specific ground pressure 31.7 kPa and 47 kPa 33 % less or 15.3 kPa

      Neutral reasons:

      Standard blade

      Width 3048 mm and 2790 mm
      Height 998 mm and 838 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2286 mm and 2130 mm
      Height to cab upper part 2985 mm and 2580 mm
      Caterpillar track length on ground level 2415 mm and 1980 mm

      Operation

      Working weight 11703 kg and 6622 kg
      Operating voltage 24 V and 12 V

      Motor

      Aspiration turbocharging and natural aspiration
      Manufacturer John Deere and Case
      Model PowerTech 6068T and 4-390

      Hydraulic system

      Overflow valve pressure 22064 kPa and 17236.9 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and Case modulated transmission with full mesh

      Carrier

      Rolling bearings number on either side 6 and 6
      Caterpillar track pitch 175.5 mm and 160 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2286 mm 2. Width between caterpillar tracks 2130 mm
      3. Height to cab upper part 2985 mm 3. Height to cab upper part 2580 mm
      4. Caterpillar track length on ground level 2415 mm 4. Caterpillar track length on ground level 1980 mm
      5. Clearance 381 mm 5. Clearance 353 mm