vs.

      John Deere 700H LT vs. Caterpillar D4G

      9 reasons to buy John Deere 700H LT:

      Standard blade

      Volume 2.6 m3 and 1.9 m3 27 % more or 0.7 m3

      Sizes

      Clearance 381 mm and 374 mm 2 % more or 7 mm

      Operation

      Engine oil volume 19 l. and 13 l. 32 % more or 6 l.
      Hydraulic system fluid volume 51 l. and 46.5 l. 9 % more or 4.5 l.
      Fuel Capacity 227 l. and 187 l. 18 % more or 40 l.

      Motor

      Full power 91.7 kW and 64.9 kW 29 % more or 26.8 kW
      Effective power 85.8 kW and 59.7 kW 30 % more or 26.1 kW
      Displacement 6.8 l. and 5 l. 26 % more or 1.8 l.

      Hydraulic system

      Pump bandwidth 95 l/min and 61.1 l/min 36 % more or 33.9 l/min

      9 reasons to buy Caterpillar D4G:

      Standard blade

      Cut depth 568 mm and 500 mm 12 % more or 68 mm

      Operation

      Final drive fluid volume 14.7 l. and 13 l. 12 % more or 1.7 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Maximum forward speed 9 km/h and 8.9 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 9.6 km/h and 8.9 km/h 7 % more or 0.7 km/h

      Carrier

      Specific ground pressure 38 kPa and 47 kPa 19 % less or 9 kPa
      Contact with ground area 20341 m2 and 2.5 m2 100 % more or 20338.5 m2
      Track shoes number per side 41 and 40 2 % more or 1
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 3048 mm and 2671 mm
      Height 998 mm and 1028 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2286 mm and 1959 mm
      Height to cab upper part 2985 mm and 2718 mm
      Caterpillar track length on ground level 2415 mm and 3103 mm
      Length without blade 4580 mm and 3103 mm

      Operation

      Cooling system fluid volume 21 l. and 21 l.
      Working weight 11703 kg and 8260 kg

      Motor

      Manufacturer John Deere and Caterpillar
      Model PowerTech 6068T and 3046T
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 22064 kPa and 20000 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and hydrostatic

      Images

      Sizes

      2. Width between caterpillar tracks 2286 mm 2. Width between caterpillar tracks 1959 mm
      3. Height to cab upper part 2985 mm 3. Height to cab upper part 2718 mm
      4. Caterpillar track length on ground level 2415 mm 4. Caterpillar track length on ground level 3103 mm
      5. Clearance 381 mm 5. Clearance 374 mm
      6. Length without blade 4580 mm 6. Length without blade 3103 mm