- Home/
- Comparison/
- Tracked Tractor/
- John Deere 700H LT vs. John Deere 850C LGP
John Deere 700H LT vs. John Deere 850C LGP
4 reasons to buy John Deere 700H LT:
Standard blade
Cut depth | 500 mm and 429 mm | 14 % more or 71 mm |
Operation
Final drive fluid volume | 13 l. and 12.3 l. | 5 % more or 0.7 l. |
Generator current strength | 55 amperes and 45 amperes | 18 % more or 10 amperes |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
18 reasons to buy John Deere 850C LGP:
Standard blade
Volume | 5.5 m3 and 2.6 m3 | 53 % more or 2.9 m3 |
Sizes
Clearance | 483 mm and 381 mm | 21 % more or 102 mm |
Operation
Engine oil volume | 32.2 l. and 19 l. | 41 % more or 13.2 l. |
Hydraulic system fluid volume | 80 l. and 51 l. | 36 % more or 29 l. |
Fuel Capacity | 348 l. and 227 l. | 35 % more or 121 l. |
Power unit fluid volume | 103 l. and 65 l. | 37 % more or 38 l. |
Cooling system fluid volume | 34 l. and 21 l. | 38 % more or 13 l. |
Motor
Full power | 143.2 kW and 91.7 kW | 36 % more or 51.5 kW |
Effective power | 138 kW and 85.8 kW | 38 % more or 52.2 kW |
Maximum torque | 814.8 Nm and 555.9 Nm | 32 % more or 258.9 Nm |
Displacement | 8.1 l. and 6.8 l. | 16 % more or 1.3 l. |
Hydraulic system
Pump bandwidth | 166 l/min and 95 l/min | 43 % more or 71 l/min |
Gear box
Maximum forward speed | 11 km/h and 8.9 km/h | 19 % more or 2.1 km/h |
Maximum reverse gear | 11 km/h and 8.9 km/h | 19 % more or 2.1 km/h |
Carrier
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Specific ground pressure | 31.7 kPa and 47 kPa | 33 % less or 15.3 kPa |
Contact with ground area | 5.9 m2 and 2.5 m2 | 58 % more or 3.4 m2 |
Track shoes number per side | 43 and 40 | 7 % more or 3 |
Neutral reasons:
Standard blade
Width | 3048 mm and 3978 mm |
Height | 998 mm and 1113 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Width between caterpillar tracks | 2286 mm and 3978 mm |
Height to cab upper part | 2985 mm and 3151 mm |
Caterpillar track length on ground level | 2415 mm and 3073 mm |
Operation
Working weight | 11703 kg and 19113 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | John Deere and John Deere |
Model | PowerTech 6068T and 6081A |
Torque measured at | 1300 rev / min and 1300 rev / min |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharging with atmospheric pressure compensation, with the charge air cooling |
Hydraulic system
Type of pump | Gear pump with fixed displacement and gear type pump |
Overflow valve pressure | 22064 kPa and 15514 kPa |
Gear box
Transmission type | Electronically controlled hydrostatic drive with a split power flow and Automatic, hydrostatic drive with a split power flow |
Carrier
Caterpillar track pitch | 175.5 mm and 203 mm |
Images
Sizes
2. Width between caterpillar tracks | 2286 mm | 2. Width between caterpillar tracks | 3978 mm |
3. Height to cab upper part | 2985 mm | 3. Height to cab upper part | 3151 mm |
4. Caterpillar track length on ground level | 2415 mm | 4. Caterpillar track length on ground level | 3073 mm |
5. Clearance | 381 mm | 5. Clearance | 483 mm |