vs.

      John Deere 700H XLT vs. Caterpillar D3C XL serie III

      14 reasons to buy John Deere 700H XLT:

      Standard blade

      Volume 2.6 m3 and 1.3 m3 50 % more or 1.3 m3
      Cut depth 541 mm and 398 mm 26 % more or 143 mm

      Sizes

      Clearance 381 mm and 300 mm 21 % more or 81 mm

      Operation

      Power unit fluid volume 65 l. and 28.2 l. 57 % more or 36.8 l.
      Final drive fluid volume 13 l. and 9.5 l. 27 % more or 3.5 l.
      Fuel Capacity 227 l. and 121.7 l. 46 % more or 105.3 l.
      Cooling system fluid volume 21 l. and 9 l. 57 % more or 12 l.
      Engine oil volume 19 l. and 13 l. 32 % more or 6 l.

      Motor

      Full power 91.7 kW and 58.2 kW 37 % more or 33.5 kW
      Effective power 85.8 kW and 52.9 kW 38 % more or 32.9 kW
      Displacement 6.8 l. and 5 l. 26 % more or 1.8 l.

      Hydraulic system

      Pump bandwidth 95 l/min and 54.1 l/min 43 % more or 40.9 l/min

      Carrier

      Track shoes number per side 42 and 39 7 % more or 3
      Rolling bearings number on either side 7 and 6 14 % more or 1

      5 reasons to buy Caterpillar D3C XL serie III:

      Operation

      Hydraulic system fluid volume 56.8 l. and 51 l. 10 % more or 5.8 l.

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev

      Gear box

      Maximum forward speed 10.8 km/h and 8.9 km/h 18 % more or 1.9 km/h
      Maximum reverse gear 11.4 km/h and 8.9 km/h 22 % more or 2.5 km/h

      Carrier

      Specific ground pressure 42.5 kPa and 45 kPa 6 % less or 2.5 kPa

      Neutral reasons:

      Standard blade

      Height 998 mm and 841 mm
      Blade angle in both directions 25 degrees and 25 degrees
      Width 3048 mm and 2474 mm

      Sizes

      Length without blade 4765 mm and 2980 mm
      Width between caterpillar tracks 2338 mm and 1828 mm
      Height to cab upper part 2985 mm and 2664 mm
      Caterpillar track length on ground level 2600 mm and 2055 mm

      Operation

      Operating voltage 24 V and 12 V
      Generator current strength 55 amperes and 55 amperes
      Working weight 12152 kg and 7231 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Caterpillar
      Model PowerTech 6068T and 3046

      Hydraulic system

      Type of pump Gear pump with fixed displacement and gear type pump
      Overflow valve pressure 22064 kPa and 17236.9 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and powershift

      Images

      Sizes

      2. Width between caterpillar tracks 2338 mm 2. Width between caterpillar tracks 1828 mm
      3. Height to cab upper part 2985 mm 3. Height to cab upper part 2664 mm
      4. Caterpillar track length on ground level 2600 mm 4. Caterpillar track length on ground level 2055 mm
      5. Clearance 381 mm 5. Clearance 300 mm
      6. Length without blade 4765 mm 6. Length without blade 2980 mm