vs.

      John Deere 750C LGP vs. John Deere 850J LT

      8 reasons to buy John Deere 750C LGP:

      Standard blade

      Blade angle in both directions 24 degrees and 23.8 degrees 1 % more or 0.2 degrees
      Cut depth 848 mm and 703 mm 17 % more or 145 mm

      Operation

      Final drive fluid volume 27.8 l. and 16.3 l. 41 % more or 11.5 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Gear box

      Maximum forward speed 11 km/h and 10.1 km/h 8 % more or 0.9 km/h
      Maximum reverse gear 11 km/h and 10.1 km/h 8 % more or 0.9 km/h

      Carrier

      Specific ground pressure 33.9 kPa and 47.3 kPa 28 % less or 13.4 kPa
      Contact with ground area 4.8 m2 and 4 m2 17 % more or 0.8 m2

      16 reasons to buy John Deere 850J LT:

      Standard blade

      Volume 3.9 m3 and 3.7 m3 5 % more or 0.2 m3

      Sizes

      Clearance 408.5 mm and 371 mm 9 % more or 37.5 mm

      Operation

      Power unit fluid volume 105.6 l. and 83.3 l. 21 % more or 22.3 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes
      Fuel Capacity 371 l. and 280 l. 25 % more or 91 l.
      Cooling system fluid volume 34.5 l. and 26.5 l. 23 % more or 8.0 l.
      Engine oil volume 26.5 l. and 19 l. 28 % more or 7.5 l.
      Hydraulic system fluid volume 105.6 l. and 68 l. 36 % more or 37.6 l.

      Motor

      Full power 143.2 kW and 110.4 kW 23 % more or 32.8 kW
      Effective power 138 kW and 104.4 kW 24 % more or 33.6 kW
      Maximum torque 828.4 Nm and 569.4 Nm 31 % more or 259.0 Nm
      Displacement 9 l. and 6.8 l. 24 % more or 2.2 l.
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Pump bandwidth 174 l/min and 144 l/min 17 % more or 30 l/min

      Carrier

      Track shoes number per side 45 and 42 7 % more or 3
      Rolling bearings number on either side 8 and 7 12 % more or 1

      Neutral reasons:

      Standard blade

      Width 3861 mm and 3708 mm
      Height 1143 mm and 1230 mm

      Sizes

      Length with blade 4916 mm and 5726 mm
      Width between caterpillar tracks 2946 mm and 2692 mm
      Height to cab upper part 3065 mm and 3180 mm
      Caterpillar track length on ground level 2781 mm and 3285 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 16625 kg and 19372 kg

      Motor

      Manufacturer John Deere and John Deere
      Model 6068T and 6090HT
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump gear type pump and piston pump
      Overflow valve pressure 13790 kPa and 24993.5 kPa

      Gear box

      Transmission type Hydrostatic drive pumps and Hydro-Static Transmission

      Carrier

      Standard shoe size 865 mm and 610 mm
      Caterpillar track pitch 190 mm and 200 mm
      Track width 2083 mm and 2083 mm

      Images

      Sizes

      1. Length with blade 4916 mm 1. Length with blade 5726 mm
      2. Width between caterpillar tracks 2946 mm 2. Width between caterpillar tracks 2692 mm
      3. Height to cab upper part 3065 mm 3. Height to cab upper part 3180 mm
      4. Caterpillar track length on ground level 2781 mm 4. Caterpillar track length on ground level 3285 mm
      5. Clearance 371 mm 5. Clearance 408.5 mm

      Carrier

      7. Track width 2083 mm 7. Track width 2083 mm
      8. Standard shoe size 865 mm 8. Standard shoe size 610 mm