vs.

      John Deere 750C LGP vs. Liebherr LR632B L

      5 reasons to buy John Deere 750C LGP:

      Standard blade

      Blade angle in both directions 24 degrees and 10 degrees 58 % more or 14 degrees
      Cut depth 848 mm and 536 mm 37 % more or 312 mm

      Operation

      Final drive fluid volume 27.8 l. and 16 l. 42 % more or 11.8 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Carrier

      Specific ground pressure 33.9 kPa and 69.6 kPa 51 % less or 35.7 kPa

      10 reasons to buy Liebherr LR632B L:

      Standard blade

      Volume 5.6 m3 and 3.7 m3 34 % more or 1.9 m3

      Sizes

      Clearance 494 mm and 371 mm 25 % more or 123 mm

      Operation

      Fuel Capacity 400 l. and 280 l. 30 % more or 120 l.
      Cooling system fluid volume 62 l. and 26.5 l. 57 % more or 35.5 l.
      Engine oil volume 43 l. and 19 l. 56 % more or 24 l.
      Hydraulic system fluid volume 162 l. and 68 l. 58 % more or 94 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes

      Motor

      Full power 150 kW and 110.4 kW 26 % more or 39.6 kW
      Displacement 10.5 l. and 6.8 l. 35 % more or 3.7 l.

      Hydraulic system

      Pump bandwidth 209 l/min and 144 l/min 31 % more or 65 l/min

      Neutral reasons:

      Standard blade

      Width 3861 mm and 3372 mm
      Height 1143 mm and 1400 mm

      Sizes

      Height to cab upper part 3065 mm and 3258 mm
      Caterpillar track length on ground level 2781 mm and 2830 mm
      Width between caterpillar tracks 2946 mm and 2381 mm

      Operation

      Working weight 16625 kg and 20398 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Model 6068T and D 936 L A6
      Cylinders number 6 and 6
      Manufacturer John Deere and Liebherr

      Hydraulic system

      Type of pump gear type pump and variable displacement piston pump of axial cam type
      Overflow valve pressure 13790 kPa and 19994.8 kPa

      Gear box

      Maximum forward speed 11 km/h and 11 km/h
      Maximum reverse gear 11 km/h and 11 km/h
      Transmission type Hydrostatic drive pumps and Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body

      Carrier

      Rolling bearings number on either side 7 and 7
      Standard shoe size 865 mm and 508 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2946 mm 2. Width between caterpillar tracks 2381 mm
      3. Height to cab upper part 3065 mm 3. Height to cab upper part 3258 mm
      4. Caterpillar track length on ground level 2781 mm 4. Caterpillar track length on ground level 2830 mm
      5. Clearance 371 mm 5. Clearance 494 mm

      Carrier

      8. Standard shoe size 865 mm 8. Standard shoe size 508 mm