vs.

      John Deere 750C LGP vs. New Holland D95 XLT

      15 reasons to buy John Deere 750C LGP:

      Standard blade

      Volume 3.7 m3 and 1.7 m3 54 % more or 2.0 m3
      Cut depth 848 mm and 483 mm 43 % more or 365 mm

      Operation

      Cooling system fluid volume 26.5 l. and 18.9 l. 29 % more or 7.6 l.
      Engine oil volume 19 l. and 15.8 l. 17 % more or 3.2 l.
      Fuel Capacity 280 l. and 189.3 l. 32 % more or 90.7 l.
      Final drive fluid volume 27.8 l. and 14.2 l. 49 % more or 13.6 l.

      Motor

      Full power 110.4 kW and 73.8 kW 33 % more or 36.6 kW
      Effective power 104.4 kW and 71.6 kW 31 % more or 32.8 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Maximum torque 569.4 Nm and 441 Nm 23 % more or 128.4 Nm
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump bandwidth 144 l/min and 76.8 l/min 47 % more or 67.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Carrier

      Specific ground pressure 33.9 kPa and 40.1 kPa 15 % less or 6.2 kPa
      Track shoes number per side 42 and 40 5 % more or 2

      5 reasons to buy New Holland D95 XLT:

      Standard blade

      Blade angle in both directions 25 degrees and 24 degrees 4 % more or 1 degrees

      Sizes

      Clearance 379 mm and 371 mm 2 % more or 8 mm

      Operation

      Hydraulic system fluid volume 75.7 l. and 68 l. 10 % more or 7.7 l.
      Generator current strength 65 amperes and 45 amperes 31 % more or 20 amperes

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Neutral reasons:

      Standard blade

      Width 3861 mm and 2640 mm
      Height 1143 mm and 910 mm

      Sizes

      Length with blade 4916 mm and 4258 mm
      Width between caterpillar tracks 2946 mm and 2590 mm
      Height to cab upper part 3065 mm and 2773 mm
      Caterpillar track length on ground level 2781 mm and 2360 mm

      Operation

      Working weight 16625 kg and 8891 kg
      Operating voltage 24 V and 12 V

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and New Holland
      Model 6068T and 667T/M2
      Aspiration turbocharging and natural aspiration

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Gear box

      Transmission type Hydrostatic drive pumps and Hydro-Static Transmission

      Carrier

      Track width 2083 mm and 1570 mm
      Caterpillar track pitch 190 mm and 171 mm
      Standard shoe size 865 mm and 460 mm
      Rolling bearings number on either side 7 and 7

      Images

      Sizes

      1. Length with blade 4916 mm 1. Length with blade 4258 mm
      2. Width between caterpillar tracks 2946 mm 2. Width between caterpillar tracks 2590 mm
      3. Height to cab upper part 3065 mm 3. Height to cab upper part 2773 mm
      4. Caterpillar track length on ground level 2781 mm 4. Caterpillar track length on ground level 2360 mm
      5. Clearance 371 mm 5. Clearance 379 mm

      Carrier

      7. Track width 2083 mm 7. Track width 1570 mm
      8. Standard shoe size 865 mm 8. Standard shoe size 460 mm