- Home/
- Comparison/
- Tracked Tractor/
- John Deere 850B vs. Case 1150H LT
John Deere 850B vs. Case 1150H LT
14 reasons to buy John Deere 850B:
Standard blade
Volume | 3 m3 and 2.6 m3 | 13 % more or 0.4 m3 |
Cut depth | 523 mm and 483 mm | 8 % more or 40 mm |
Sizes
Clearance | 417 mm and 328 mm | 21 % more or 89 mm |
Operation
Fuel Capacity | 310.4 l. and 212 l. | 32 % more or 98.4 l. |
Cooling system fluid volume | 34 l. and 27.4 l. | 19 % more or 6.6 l. |
Hydraulic system fluid volume | 132.5 l. and 64.4 l. | 51 % more or 68.1 l. |
Final drive fluid volume | 13.2 l. and 7.6 l. | 42 % more or 5.6 l. |
Motor
Maximum torque | 783.7 Nm and 504.4 Nm | 36 % more or 279.3 Nm |
Displacement | 7.6 l. and 5.9 l. | 22 % more or 1.7 l. |
Full power | 130.5 kW and 92.5 kW | 29 % more or 38.0 kW |
Effective power | 123 kW and 88.7 kW | 28 % more or 34.3 kW |
Hydraulic system
Pump bandwidth | 166 l/min and 132.1 l/min | 20 % more or 33.9 l/min |
Gear box
Maximum forward speed | 10.5 km/h and 9.3 km/h | 11 % more or 1.2 km/h |
Carrier
Contact with ground area | 2.9 m2 and 2.7 m2 | 7 % more or 0.2 m2 |
6 reasons to buy Case 1150H LT:
Operation
Generator current strength | 65 amperes and 40 amperes | 38 % more or 25 amperes |
Motor
Torque measured at | 1600 rev / min and 1200 rev / min | 25 % more or 400 rev |
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Gear box
Maximum reverse gear | 11.1 km/h and 10.5 km/h | 5 % more or 0.6 km/h |
Carrier
Track shoes number per side | 43 and 37 | 14 % more or 6 |
Rolling bearings number on either side | 7 and 2 | 71 % more or 5 |
Neutral reasons:
Standard blade
Height | 1067 mm and 1118 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Width between caterpillar tracks | 3124 mm and 2130 mm |
Height to cab upper part | 3200 mm and 3020 mm |
Caterpillar track length on ground level | 2413 mm and 2460 mm |
Operation
Working weight | 17198 kg and 11475.9 kg |
Operating voltage | 24 V and 12 V |
Motor
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Case |
Model | 6466A and 6T-590 |
Hydraulic system
Overflow valve pressure | 15514 kPa and 13789.5 kPa |
Gear box
Transmission type | Automatic, hydrostatic drive with a split power flow and Case modulated powershift with full mesh |
Carrier
Standard shoe size | 610 mm and 558.8 mm |
Images
Sizes
5. Clearance | 417 mm | 5. Clearance | 328 mm |
2. Width between caterpillar tracks | 3124 mm | 2. Width between caterpillar tracks | 2130 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3020 mm |
4. Caterpillar track length on ground level | 2413 mm | 4. Caterpillar track length on ground level | 2460 mm |
Carrier
8. Standard shoe size | 610 mm | 8. Standard shoe size | 558.8 mm |