- Home/
- Comparison/
- Tracked Tractor/
- John Deere 850J LGP vs. John Deere 750C WT
John Deere 850J LGP vs. John Deere 750C WT
18 reasons to buy John Deere 850J LGP:
Standard blade
Cut depth | 703 mm and 513 mm | 27 % more or 190 mm |
Volume | 4.5 m3 and 2.5 m3 | 44 % more or 2.0 m3 |
Sizes
Clearance | 408.5 mm and 371 mm | 9 % more or 37.5 mm |
Operation
Generator current strength | 80 amperes and 45 amperes | 44 % more or 35 amperes |
Fuel Capacity | 371 l. and 280 l. | 25 % more or 91 l. |
Cooling system fluid volume | 34.5 l. and 26.5 l. | 23 % more or 8.0 l. |
Engine oil volume | 26.5 l. and 19 l. | 28 % more or 7.5 l. |
Hydraulic system fluid volume | 105.6 l. and 68 l. | 36 % more or 37.6 l. |
Motor
Full power | 156.6 kW and 110.4 kW | 30 % more or 46.2 kW |
Effective power | 149 kW and 104.4 kW | 30 % more or 44.6 kW |
Maximum torque | 915.2 Nm and 569.4 Nm | 38 % more or 345.8 Nm |
Displacement | 9 l. and 6.8 l. | 24 % more or 2.2 l. |
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Hydraulic system
Pump bandwidth | 174 l/min and 144 l/min | 17 % more or 30 l/min |
Carrier
Specific ground pressure | 33.5 kPa and 33.6 kPa | 0 % less or 0.1 kPa |
Contact with ground area | 6 m2 and 4.5 m2 | 25 % more or 1.5 m2 |
Track shoes number per side | 45 and 40 | 11 % more or 5 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
4 reasons to buy John Deere 750C WT:
Operation
Final drive fluid volume | 23.6 l. and 16.3 l. | 31 % more or 7.3 l. |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Gear box
Maximum forward speed | 11 km/h and 10.1 km/h | 8 % more or 0.9 km/h |
Maximum reverse gear | 11 km/h and 10.1 km/h | 8 % more or 0.9 km/h |
Neutral reasons:
Standard blade
Width | 4267 mm and 3363 mm |
Height | 1230 mm and 976 mm |
Sizes
Length with blade | 5726 mm and 4956 mm |
Width between caterpillar tracks | 3302 mm and 2438 mm |
Height to cab upper part | 3180 mm and 3065 mm |
Caterpillar track length on ground level | 3285 mm and 2591 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 20442 kg and 15147 kg |
Motor
Manufacturer | John Deere and John Deere |
Cylinders number | 6 and 6 |
Model | 6090 and 6068T |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with atmospheric pressure compensation |
Hydraulic system
Type of pump | piston pump and gear type pump |
Overflow valve pressure | 24993.5 kPa and 13790 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Hydro-Static Transmission |
Carrier
Standard shoe size | 914 mm and 865 mm |
Caterpillar track pitch | 200 mm and 190 mm |
Track width | 2388 mm and 1880 mm |
Images
Sizes
5. Clearance | 408.5 mm | 5. Clearance | 371 mm |
1. Length with blade | 5726 mm | 1. Length with blade | 4956 mm |
2. Width between caterpillar tracks | 3302 mm | 2. Width between caterpillar tracks | 2438 mm |
3. Height to cab upper part | 3180 mm | 3. Height to cab upper part | 3065 mm |
4. Caterpillar track length on ground level | 3285 mm | 4. Caterpillar track length on ground level | 2591 mm |
Carrier
7. Track width | 2388 mm | 7. Track width | 1880 mm |
8. Standard shoe size | 914 mm | 8. Standard shoe size | 865 mm |