- Home/
- Comparison/
- Tracked Tractor/
- John Deere 850J LT vs. New Holland D85 LGP
John Deere 850J LT vs. New Holland D85 LGP
19 reasons to buy John Deere 850J LT:
Standard blade
Volume | 3.9 m3 and 2 m3 | 49 % more or 1.9 m3 |
Cut depth | 703 mm and 483 mm | 31 % more or 220 mm |
Sizes
Clearance | 408.5 mm and 379 mm | 7 % more or 29.5 mm |
Operation
Fuel Capacity | 371 l. and 189.3 l. | 49 % more or 181.7 l. |
Cooling system fluid volume | 34.5 l. and 18.9 l. | 45 % more or 15.6 l. |
Engine oil volume | 26.5 l. and 13.6 l. | 49 % more or 12.9 l. |
Hydraulic system fluid volume | 105.6 l. and 75.7 l. | 28 % more or 29.9 l. |
Final drive fluid volume | 16.3 l. and 14.2 l. | 13 % more or 2.1 l. |
Generator current strength | 80 amperes and 65 amperes | 19 % more or 15 amperes |
Motor
Maximum torque | 828.4 Nm and 400 Nm | 52 % more or 428.4 Nm |
Displacement | 9 l. and 4.5 l. | 50 % more or 4.5 l. |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 143.2 kW and 66.4 kW | 54 % more or 76.8 kW |
Effective power | 138 kW and 62.6 kW | 55 % more or 75.4 kW |
Hydraulic system
Pump bandwidth | 174 l/min and 76.8 l/min | 56 % more or 97.2 l/min |
Gear box
Maximum forward speed | 10.1 km/h and 9.7 km/h | 4 % more or 0.4 km/h |
Carrier
Track shoes number per side | 45 and 39 | 13 % more or 6 |
Rolling bearings number on either side | 8 and 6 | 25 % more or 2 |
3 reasons to buy New Holland D85 LGP:
Standard blade
Blade angle in both directions | 25 degrees and 23.8 degrees | 5 % more or 1.2 degrees |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Specific ground pressure | 27.9 kPa and 47.3 kPa | 41 % less or 19.4 kPa |
Neutral reasons:
Standard blade
Width | 3708 mm and 3150 mm |
Height | 1230 mm and 910 mm |
Sizes
Length with blade | 5726 mm and 4171 mm |
Width between caterpillar tracks | 2692 mm and 2900 mm |
Height to cab upper part | 3180 mm and 2773 mm |
Caterpillar track length on ground level | 3285 mm and 2260 mm |
Operation
Working weight | 19372 kg and 9163 kg |
Operating voltage | 24 V and 12 V |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Manufacturer | John Deere and New Holland |
Model | 6090HT and 445T/M2 |
Hydraulic system
Type of pump | piston pump and gear type pump |
Gear box
Transmission type | Hydro-Static Transmission and Hydro-Static Transmission |
Carrier
Standard shoe size | 610 mm and 710 mm |
Caterpillar track pitch | 200 mm and 171 mm |
Track width | 2083 mm and 2260 mm |
Images
Sizes
1. Length with blade | 5726 mm | 1. Length with blade | 4171 mm |
2. Width between caterpillar tracks | 2692 mm | 2. Width between caterpillar tracks | 2900 mm |
3. Height to cab upper part | 3180 mm | 3. Height to cab upper part | 2773 mm |
4. Caterpillar track length on ground level | 3285 mm | 4. Caterpillar track length on ground level | 2260 mm |
5. Clearance | 408.5 mm | 5. Clearance | 379 mm |
Carrier
7. Track width | 2083 mm | 7. Track width | 2260 mm |
8. Standard shoe size | 610 mm | 8. Standard shoe size | 710 mm |