vs.

      John Deere 850J WH LGP vs. Dressta TD25M

      7 reasons to buy John Deere 850J WH LGP:

      Operation

      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump bandwidth 174 l/min and 1.7 l/min 99 % more or 172.3 l/min

      Carrier

      Specific ground pressure 35.5 kPa and 100 kPa 64 % less or 64.5 kPa
      Contact with ground area 6 m2 and 3.5 m2 42 % more or 2.5 m2
      Track shoes number per side 45 and 38 16 % more or 7
      Rolling bearings number on either side 8 and 7 12 % more or 1

      12 reasons to buy Dressta TD25M:

      Standard blade

      Volume 11.5 m3 and 9.9 m3 14 % more or 1.6 m3
      Blade angle in both directions 25 degrees and 23.8 degrees 5 % more or 1.2 degrees
      Cut depth 1700 mm and 704 mm 59 % more or 996 mm

      Operation

      Fuel Capacity 825 l. and 371 l. 55 % more or 454 l.
      Cooling system fluid volume 56 l. and 35 l. 37 % more or 21 l.
      Engine oil volume 49 l. and 26 l. 47 % more or 23 l.
      Hydraulic system fluid volume 130 l. and 106 l. 18 % more or 24 l.
      Power unit fluid volume 240 l. and 106 l. 56 % more or 134 l.

      Motor

      Displacement 15 l. and 9 l. 40 % more or 6 l.
      Effective power 246 kW and 151 kW 39 % more or 95 kW

      Gear box

      Maximum forward speed 10.3 km/h and 10.1 km/h 2 % more or 0.2 km/h
      Maximum reverse gear 12.3 km/h and 10.1 km/h 18 % more or 2.2 km/h

      Neutral reasons:

      Standard blade

      Width 4267 mm and 4350 mm
      Height 1830 mm and 1760 mm

      Sizes

      Width between caterpillar tracks 3302 mm and 3210 mm
      Height to cab upper part 3175 mm and 3800 mm

      Operation

      Working weight 22184 kg and 36230 kg
      Operating voltage 24 V and 12 V

      Motor

      Model 6090HT and QSX15
      Cylinders number 6 and 6
      Power measured at 1800 rev / min and 1800 rev / min
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharger with charge air cooling
      Manufacturer John Deere and Cummins

      Hydraulic system

      Type of pump piston pump and Numerous vane pumps, actuated with torque converter
      Overflow valve pressure 3625 lb / sq. inch and 1 lb / sq. inch

      Gear box

      Transmission type Hydrostatic with direct drive and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 914 mm and 560 mm

      Images

      Sizes

      2. Width between caterpillar tracks 3302 mm 2. Width between caterpillar tracks 3210 mm
      3. Height to cab upper part 3175 mm 3. Height to cab upper part 3800 mm

      Carrier

      8. Standard shoe size 914 mm 8. Standard shoe size 560 mm