vs.

      John Deere 850J WH LGP vs. John Deere 950C LGP

      8 reasons to buy John Deere 850J WH LGP:

      Standard blade

      Volume 9.9 m3 and 6.3 m3 36 % more or 3.6 m3
      Cut depth 704 mm and 600 mm 15 % more or 104 mm

      Operation

      Engine oil volume 26 l. and 25.5 l. 2 % more or 0.5 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Carrier

      Contact with ground area 6 m2 and 4.7 m2 22 % more or 1.3 m2
      Track shoes number per side 45 and 43 4 % more or 2
      Specific ground pressure 35.5 kPa and 51 kPa 30 % less or 15.5 kPa

      12 reasons to buy John Deere 950C LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 23.8 degrees 5 % more or 1.2 degrees

      Sizes

      Clearance 482 mm and 409 mm 15 % more or 73 mm

      Operation

      Cooling system fluid volume 64.4 l. and 35 l. 46 % more or 29.4 l.
      Hydraulic system fluid volume 178 l. and 106 l. 40 % more or 72 l.
      Power unit fluid volume 178 l. and 106 l. 40 % more or 72 l.
      Fuel Capacity 450 l. and 371 l. 18 % more or 79 l.

      Motor

      Displacement 10 l. and 9 l. 10 % more or 1 l.
      Effective power 171.5 kW and 151 kW 12 % more or 20.5 kW
      Maximum torque 1080.6 Nm and 915 Nm 15 % more or 165.6 Nm

      Hydraulic system

      Pump bandwidth 292 l/min and 174 l/min 40 % more or 118 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.1 km/h 8 % more or 0.9 km/h
      Maximum reverse gear 11 km/h and 10.1 km/h 8 % more or 0.9 km/h

      Neutral reasons:

      Standard blade

      Width 4267 mm and 4500 mm
      Height 1830 mm and 1350 mm

      Sizes

      Height to cab upper part 3175 mm and 3305 mm
      Caterpillar track length on ground level 3284 mm and 3275 mm
      Length with blade 5728 mm and 5770 mm
      Width between caterpillar tracks 3302 mm and 2896 mm

      Operation

      Working weight 22184 kg and 24600 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with intercooler
      Manufacturer John Deere and Liebherr
      Model 6090HT and D 926 TI
      Power measured at 1800 rev / min and 1800 rev / min

      Hydraulic system

      Type of pump piston pump and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 24993.5 kPa and 16000 kPa

      Gear box

      Transmission type Hydrostatic with direct drive and Electronically controlled closed loop hydrostatic drive with a split power flow

      Carrier

      Rolling bearings number on either side 8 and 8
      Caterpillar track pitch 203 mm and 215.9 mm
      Standard shoe size 914 mm and 710 mm
      Track width 2388 mm and 2180 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 3284 mm 4. Caterpillar track length on ground level 3275 mm
      5. Clearance 409 mm 5. Clearance 482 mm
      1. Length with blade 5728 mm 1. Length with blade 5770 mm
      2. Width between caterpillar tracks 3302 mm 2. Width between caterpillar tracks 2896 mm
      3. Height to cab upper part 3175 mm 3. Height to cab upper part 3305 mm

      Carrier

      7. Track width 2388 mm 7. Track width 2180 mm
      8. Standard shoe size 914 mm 8. Standard shoe size 710 mm