vs.

      John Deere 950C LGP vs. Dressta TD25M

      9 reasons to buy John Deere 950C LGP:

      Operation

      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Cooling system fluid volume 64.4 l. and 56 l. 13 % more or 8.4 l.
      Hydraulic system fluid volume 178 l. and 130 l. 27 % more or 48 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 1.7 l/min 99 % more or 290.3 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.3 km/h 6 % more or 0.7 km/h

      Carrier

      Specific ground pressure 51 kPa and 100 kPa 49 % less or 49 kPa
      Contact with ground area 4.7 m2 and 3.5 m2 26 % more or 1.2 m2
      Track shoes number per side 43 and 38 12 % more or 5
      Rolling bearings number on either side 8 and 7 12 % more or 1

      10 reasons to buy Dressta TD25M:

      Standard blade

      Cut depth 1700 mm and 600 mm 65 % more or 1100 mm
      Volume 11.5 m3 and 6.3 m3 45 % more or 5.2 m3

      Operation

      Fuel Capacity 825 l. and 450 l. 45 % more or 375 l.
      Engine oil volume 49 l. and 25.5 l. 48 % more or 23.5 l.
      Power unit fluid volume 240 l. and 178 l. 26 % more or 62 l.
      Final drive fluid volume 64 l. and 14.5 l. 77 % more or 49.5 l.

      Motor

      Effective power 246 kW and 171.5 kW 30 % more or 74.5 kW
      Displacement 15 l. and 10 l. 33 % more or 5 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Maximum reverse gear 12.3 km/h and 11 km/h 11 % more or 1.3 km/h

      Neutral reasons:

      Standard blade

      Width 4500 mm and 4350 mm
      Height 1350 mm and 1760 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 4300 mm and 5070 mm
      Width between caterpillar tracks 2896 mm and 3210 mm
      Height to cab upper part 3305 mm and 3800 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 24600 kg and 36230 kg

      Motor

      Power measured at 1800 rev / min and 1800 rev / min
      Aspiration Turbocharging with intercooler and Turbocharger with charge air cooling
      Manufacturer Liebherr and Cummins
      Cylinders number 6 and 6
      Model D 926 TI and QSX15

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Numerous vane pumps, actuated with torque converter
      Overflow valve pressure 2320 lb / sq. inch and 1 lb / sq. inch

      Gear box

      Forward gears number 3 and 3
      Reverse gears number 3 and 3
      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 710 mm and 560 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2896 mm 2. Width between caterpillar tracks 3210 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 3800 mm
      6. Length without blade 4300 mm 6. Length without blade 5070 mm

      Carrier

      8. Standard shoe size 710 mm 8. Standard shoe size 560 mm