vs.

      John Deere 950C LGP vs. John Deere 700J XLT

      18 reasons to buy John Deere 950C LGP:

      Standard blade

      Volume 6.3 m3 and 2.6 m3 59 % more or 3.7 m3
      Cut depth 600 mm and 533 mm 11 % more or 67 mm

      Sizes

      Clearance 482 mm and 381 mm 21 % more or 101 mm

      Operation

      Hydraulic system fluid volume 178 l. and 51.1 l. 71 % more or 126.9 l.
      Power unit fluid volume 178 l. and 65.1 l. 63 % more or 112.9 l.
      Final drive fluid volume 14.5 l. and 13 l. 10 % more or 1.5 l.
      Fuel Capacity 450 l. and 227 l. 50 % more or 223 l.
      Cooling system fluid volume 64.4 l. and 21.2 l. 67 % more or 43.2 l.
      Engine oil volume 25.5 l. and 19 l. 25 % more or 6.5 l.

      Motor

      Effective power 171.5 kW and 86 kW 50 % more or 85.5 kW
      Maximum torque 1080.6 Nm and 537 Nm 50 % more or 543.6 Nm
      Displacement 10 l. and 6.8 l. 32 % more or 3.2 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 94.6 l/min 68 % more or 197.4 l/min

      Gear box

      Maximum reverse gear 11 km/h and 8.9 km/h 19 % more or 2.1 km/h
      Maximum forward speed 11 km/h and 8.9 km/h 19 % more or 2.1 km/h

      Carrier

      Contact with ground area 4.7 m2 and 2.9 m2 38 % more or 1.8 m2
      Track shoes number per side 43 and 39 9 % more or 4
      Rolling bearings number on either side 8 and 7 12 % more or 1

      1 reasons to buy John Deere 700J XLT:

      Carrier

      Specific ground pressure 40.7 kPa and 51 kPa 20 % less or 10.3 kPa

      Neutral reasons:

      Standard blade

      Width 4500 mm and 3048 mm
      Height 1350 mm and 991 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length with blade 5770 mm and 4775 mm
      Width between caterpillar tracks 2896 mm and 2337 mm
      Height to cab upper part 3305 mm and 2997 mm
      Caterpillar track length on ground level 3275 mm and 2591 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 24600 kg and 12303 kg
      Generator current strength 55 amperes and 55 amperes

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Cylinders number 6 and 6
      Manufacturer Liebherr and John Deere
      Model D 926 TI and 6068T

      Hydraulic system

      Overflow valve pressure 16000 kPa and 22063.2 kPa
      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and gear type pump

      Gear box

      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Hydro-Static Transmission

      Carrier

      Standard shoe size 710 mm and 559 mm
      Caterpillar track pitch 215.9 mm and 190.5 mm
      Track width 2180 mm and 1778 mm

      Images

      Sizes

      1. Length with blade 5770 mm 1. Length with blade 4775 mm
      2. Width between caterpillar tracks 2896 mm 2. Width between caterpillar tracks 2337 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 2997 mm
      4. Caterpillar track length on ground level 3275 mm 4. Caterpillar track length on ground level 2591 mm
      5. Clearance 482 mm 5. Clearance 381 mm

      Carrier

      7. Track width 2180 mm 7. Track width 1778 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 559 mm